AutoCodes – GMC – P0667 2018 GMC Sierra

P0667 2018 GMC Sierra Code - Control Module Temperature Sensor Performance

Quick Answer

The Transmission Control Module (TCM) temperature sensor is located inside of the control solenoid valve assembly which has no serviceable parts. Common causes include Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted, Control Solenoid Valve Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0667 2018 GMC Sierra indicates Control Module Temperature Sensor Performance.
Common causes: Common causes include Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted, Control Solenoid Valve Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 169

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 23, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0667 2018 GMC Sierra Description

The Transmission Control Module (TCM) temperature sensor is located inside of the control solenoid valve assembly which has no serviceable parts. The Transmission Control Module temperature sensor provides the temperature of the Transmission Control Module substrate. This temperature reading is used in various diagnostic routines in the Transmission Control Module software. This fault is handled inside the Transmission Control Module and no external circuits are involved. The Diagnostic Trouble Code (DTC) will be set when the TCM detects a 20–50°C (36–90°F) or greater difference between the transmission fluid temperature and the TCM substrate temperature, which depends on the average of the transmission fluid temperature, TCM substrate temperature, and the TCM power up temperature.

OBDII Code P0667 2018 GMC Sierra - Control Module Temperature Sensor Performance - AutoCodes.com — P0667 2018 GMC Sierra Code - Control Module Temperature Sensor Performance

What does this mean?

What are the Possible Causes of the DTC P0667 2018 GMC Sierra?

Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness is open or shorted
Control Solenoid Valve Assembly circuit poor electrical connection

How to Fix the DTC P0667 2018 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0667 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0667 2018 GMC Sierra code?

Need more information on how to fix the P0667 2018 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0667 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.