AutoCodes – Hyundai – P0664 2005 Hyundai Tucson

P0664 2005 Hyundai Tucson Code - Intake Manifold Tuning Valve Control Circuit Low Bank 2

Quick Answer

Intake manifold turning valve is used to increase torque at lower rpm and increase horsepower at higher rpm. Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve harness is open or shorted, Intake Manifold Tuning Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0664 2005 Hyundai Tucson indicates Intake Manifold Tuning Valve Control Circuit Low Bank 2.
Common causes: Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve harness is open or shorted, Intake Manifold Tuning Valve circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,583

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0664 2005 Hyundai Tucson Description

Intake manifold turning valve is used to increase torque at lower rpm and increase horsepower at higher rpm. Delta 2.7t engine has two intakes runners for each cylinder. The primary intake runner is a long, thin tub in which the intake air passes through. This allows a strong stream of air to blast into the cylinder, helping low-end torque. The secondary intake runner is a short, fat tube. This allows a large volume of air to be sucked into the engine, increasing high-end horse power. At lower rpm range, the engine does not provide enough suction into the cylinders, starving the engine of much needed oxygen. The skinny tube helps blast the air into the cylinder for more oxygen. At higher rpm, the engine has plenty of suction but the intake runner is too small to provide the oxygen it needs. The short, fat tube allows plenty of of oxygen to be sucked in. The Engine Control Module (ECM) controls this function utilizing a intake manifold tuning valve, thereby directing intake air through a longer path for low rpm range or a shorter path for high rpm range.

OBDII Code P0664 2005 Hyundai Tucson - Intake Manifold Tuning Valve Control Circuit Low Bank 2 - AutoCodes.com — P0664 2005 Hyundai Tucson Code - Intake Manifold Tuning Valve Control Circuit Low Bank 2

What does this mean?

What are the Possible Causes of the DTC P0664 2005 Hyundai Tucson?

Faulty Intake Manifold Tuning Valve (IMTV)
Intake Manifold Tuning Valve harness is open or shorted
Intake Manifold Tuning Valve circuit poor electrical connection

How to Fix the DTC P0664 2005 Hyundai Tucson?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0664 2005 Hyundai Tucson code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0664 2005 Hyundai Tucson code?

Need more information on how to fix the P0664 2005 Hyundai Tucson code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0664 2005 Hyundai Tucson code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0664 2005 Hyundai Tucson Code

1. What does the OBDII code P0664 for a 2005 Hyundai Tucson mean?

The code P0664 indicates a problem with the Intake Manifold Tuning Valve Control Circuit Low Bank 2 in the vehicle.

2. What are the common symptoms of a P0664 code in a 2005 Hyundai Tucson?

Common symptoms of a P0664 code may include poor engine performance, rough idling, decreased fuel efficiency, and potentially stalling.

3. What are the possible causes of a P0664 code in a 2005 Hyundai Tucson?

Possible causes of a P0664 code include a faulty intake manifold tuning valve, damaged wiring or connectors in the control circuit, or a problem with the engine control module (ECM).

4. How can I diagnose a P0664 code in my 2005 Hyundai Tucson?

Diagnosing a P0664 code typically involves using a scan tool to read the code, inspecting the intake manifold tuning valve and its wiring, and testing the control circuit for proper voltage and continuity.

5. Can I drive my 2005 Hyundai Tucson with a P0664 code?

It is not recommended to drive your vehicle with a P0664 code, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.

6. How can I repair a P0664 code in my 2005 Hyundai Tucson?

Repairing a P0664 code may involve replacing the intake manifold tuning valve, repairing or replacing damaged wiring or connectors, or reprogramming the engine control module (ECM).

7. Can a DIY enthusiast fix a P0664 code in a 2005 Hyundai Tucson?

While some DIY enthusiasts may be able to address a P0664 code by following repair guides and utilizing the necessary tools, it is recommended to consult a professional mechanic for accurate diagnosis and repair.

8. How much does it cost to repair a P0664 code in a 2005 Hyundai Tucson?

The cost of repairing a P0664 code can vary depending on the specific issue causing the code, the labor rates in your area, and whether you choose to repair it yourself or take it to a professional mechanic.

9. Will a P0664 code cause my check engine light to come on in a 2005 Hyundai Tucson?

Yes, a P0664 code will trigger the check engine light to illuminate on the dashboard of your 2005 Hyundai Tucson to alert you of a potential issue with the intake manifold tuning valve control circuit.

10. How urgent is it to address a P0664 code in a 2005 Hyundai Tucson?

It is important to address a P0664 code promptly to prevent any further damage to the engine and ensure optimal performance and fuel efficiency of your 2005 Hyundai Tucson.