P0662 HYUNDAI - Intake Manifold Tuning Valve Control Circuit High Bank 1
- Faulty Intake Manifold Tuning Valve (IMTV)
- Intake Manifold Tuning Valve harness is open or shorted
- Intake Manifold Tuning Valve circuit poor electrical connection
When is the code detected?The Engine Control Module (ECM) has detected a high signal from the Intake Manifold Tuning Valve (IMTV)
- Engine Light ON (or Service Engine Soon Warning Light)
P0662 Hyundai DescriptionIntake manifold turning valve is used to increase torque at lower rpm and increase horsepower at higher rpm. Delta 2.7t engine has two intakes runners for each cylinder. The primary intake runner is a long, thin tube in which the intake air passes through. This allows a strong stream of air to blast into the cylinder, helping low-end torque. The secondary intake runner is a short, fat tube. This allows a large volume of air to be sucked into the engine, increasing high-end horsepower. At lower rpm range, the engine does not provide enough suction into the cylinders, starving the engine of needed oxygen. The skinny tube helps blast the air into the cylinder for more oxygen. At higher rpm, the engine has plenty of suction but the intake runner is too small to provide the oxygen it needs. The short, fat tube allows plenty of oxygen to be sucked in. The Engine Control Module (ECM) controls this function utilizing an intake manifold tuning valve, thereby directing intake air through a longer path for low rpm range or a shorter path for high rpm range.
P0662 Hyundai Information for specific Hyundai models
Need more help?Get the P0662 Hyundai code diagnosed by a professional: Find a repair shop in your area
P0662 HYUNDAI CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0662 Hyundai code? Have you replaced any parts?
Any information is appreciated. Thanks