AutoCodes – Honda – P0662 2005 Honda CR-V

P0662 2005 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage

Quick Answer

Engine power is achieved by closing and opening the Intake Manifold Runner Control (IMRC) valve. Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0662 2005 Honda CR-V indicates Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage.
Common causes: Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,309

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 04, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0662 2005 Honda CR-V Description

Engine power is achieved by closing and opening the Intake Manifold Runner Control (IMRC) valve. When the valve is closed, there is high torque at low engine speed. When the valve is open, there is high torque a high engine speed.
The Intake Manifold Runner Control (IMRC) valve position sensor is mounted on the IMRC valve shaft and detects an IMRC valve position. The IMRC valve position sensor includes the brush that moves with the IMRC valve, and it has a linear signal output in relation to the IMRC valve position when sliding on the board. The Engine Control Module (ECM) monitors the IMRC valve position sensor voltage which represents the IMRC valve position. If the output voltage from the IMRC valve position sensor is higher than a set value, a malfunction is detected and a DTC is stored.

OBDII Code P0662 2005 Honda CR-V - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage - AutoCodes.com — P0662 2005 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P0662 2005 Honda CR-V?

Faulty Intake Manifold Runner Control (IMRC) Sensor
Intake Manifold Runner Control harness is open or shorted
Intake Manifold Runner Control circuit poor electrical connection

How to Fix the DTC P0662 2005 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Intake Manifold Runner Control might need to be cleaned or replaced. Intake Manifold Runner Control might be sold separately or with the intake manifold call a local dealer to find out.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0662 2005 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0662 2005 Honda CR-V code?

Need more information on how to fix the P0662 2005 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0662 2005 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0662 2005 Honda CR-V Code

1. What are the common symptoms of OBDII code P0662 in a 2005 Honda CR-V?

The common symptoms of code P0662 in a 2005 Honda CR-V may include engine stalling, rough idle, decreased fuel efficiency, and the Check Engine light illuminating.

2. What does the OBDII code P0662 for a 2005 Honda CR-V indicate?

Code P0662 on a 2005 Honda CR-V indicates a high voltage condition in the intake manifold runner control valve position sensor circuit.

3. What are the possible causes of OBDII code P0662 in a 2005 Honda CR-V?

Possible causes of code P0662 in a 2005 Honda CR-V include a faulty intake manifold runner control valve, damaged wiring or connectors in the sensor circuit, or a malfunctioning engine control module (ECM).

4. How can I diagnose the cause of OBDII code P0662 in my 2005 Honda CR-V?

Diagnosing code P0662 in a 2005 Honda CR-V involves inspecting the intake manifold runner control valve, checking the sensor circuit for continuity and shorts, and using a scan tool to monitor sensor readings.

5. Can I continue driving my 2005 Honda CR-V with OBDII code P0662?

It is not recommended to continue driving your 2005 Honda CR-V with code P0662, as it can lead to further engine damage and potentially unsafe driving conditions.

6. How can I repair OBDII code P0662 in my 2005 Honda CR-V?

To repair code P0662 in a 2005 Honda CR-V, you may need to replace the intake manifold runner control valve, repair or replace damaged wiring or connectors, or reprogram the engine control module.

7. Is it possible to reset OBDII code P0662 in a 2005 Honda CR-V without fixing the underlying issue?

Resetting code P0662 in a 2005 Honda CR-V without fixing the underlying issue will only temporarily clear the code, and the problem will likely resurface. It is important to address the root cause of the code for a permanent solution.

8. How much does it typically cost to repair OBDII code P0662 in a 2005 Honda CR-V?

The cost of repairing code P0662 in a 2005 Honda CR-V can vary depending on the exact cause of the issue, but it may range from $200 to $600, including parts and labor.

9. Can a DIY enthusiast fix OBDII code P0662 in a 2005 Honda CR-V?

While some aspects of diagnosing and repairing code P0662 may be DIY-friendly, it is recommended to have a professional mechanic handle the repair to ensure proper diagnosis and safe resolution of the issue.