P0662 2004 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage
Quick Answer
Engine power is achieved by closing and opening the Intake Manifold Runner Control (IMRC) valve. Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0662 2004 Honda CR-V indicates Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0662 2004 Honda CR-V Description
The Intake Manifold Runner Control (IMRC) valve position sensor is mounted on the IMRC valve shaft and detects an IMRC valve position. The IMRC valve position sensor includes the brush that moves with the IMRC valve, and it has a linear signal output in relation to the IMRC valve position when sliding on the board. The Engine Control Module (ECM) monitors the IMRC valve position sensor voltage which represents the IMRC valve position. If the output voltage from the IMRC valve position sensor is higher than a set value, a malfunction is detected and a DTC is stored.
What are the Possible Causes of the DTC P0662 2004 Honda CR-V?
- Faulty Intake Manifold Runner Control (IMRC) Sensor
- Intake Manifold Runner Control harness is open or shorted
- Intake Manifold Runner Control circuit poor electrical connection
How to Fix the DTC P0662 2004 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0662 2004 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0662 2004 Honda CR-V code?
Need more information on how to fix the P0662 2004 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0662 2004 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0662 2004 Honda CR-V Code
1. What are common symptoms of OBDII code P0662 in a 2004 Honda CR-V?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the Check Engine light illuminating on the dashboard.
2. What does the OBDII code P0662 indicate in a 2004 Honda CR-V?
- OBDII code P0662 indicates a high voltage condition in the intake manifold runner control valve position sensor circuit.
3. What are possible causes of OBDII code P0662 in a 2004 Honda CR-V?
- Possible causes include a faulty intake manifold runner control valve, damaged wiring or connectors in the sensor circuit, or a malfunctioning engine control module (ECM).
4. How can I diagnose the intake manifold runner control valve position sensor circuit for OBDII code P0662 in my 2004 Honda CR-V?
- You can diagnose the sensor circuit by performing a visual inspection of the wiring and connectors, testing the sensor for proper voltage readings, and using a scan tool to monitor sensor data.
5. Can I continue driving my 2004 Honda CR-V with OBDII code P0662?
- It is not recommended to continue driving with OBDII code P0662 present, as it can lead to further damage to the engine and affect vehicle performance.
6. How can I repair OBDII code P0662 in my 2004 Honda CR-V?
- Repair involves identifying the root cause of the high voltage condition, which may include replacing the intake manifold runner control valve, repairing damaged wiring or connectors, or reprogramming the ECM.
7. Is it possible to reset OBDII code P0662 in a 2004 Honda CR-V without fixing the underlying issue?
- While you can clear the code temporarily, it is likely to reappear if the underlying issue causing the high voltage condition is not resolved.
8. Can a DIY enthusiast fix OBDII code P0662 in a 2004 Honda CR-V?
- Depending on the skill level and tools available, some DIY enthusiasts may be able to diagnose and repair OBDII code P0662, but it is recommended to consult a professional for accurate diagnosis and repair.
9. How much does it typically cost to repair OBDII code P0662 in a 2004 Honda CR-V at a mechanic or dealership?
- Repair costs can vary depending on the exact cause of the high voltage condition, but it may range from $200 to $500, including parts and labor.
10. Will fixing OBDII code P0662 improve the overall performance of my 2004 Honda CR-V?
- Yes, resolving OBDII code P0662 and fixing the intake manifold runner control valve position sensor circuit issue should lead to improved engine performance, smoother idling, and better fuel efficiency in your Honda CR-V.
Discuss the causes and fixes for P0662 2004 Honda CR-V OBDII Code
Code P0662 2004 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
