P0662 2003 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage
Quick Answer
Engine power is achieved by closing and opening the Intake Manifold Runner Control (IMRC) valve. Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0662 2003 Honda CR-V indicates Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0662 2003 Honda CR-V Description
The Intake Manifold Runner Control (IMRC) valve position sensor is mounted on the IMRC valve shaft and detects an IMRC valve position. The IMRC valve position sensor includes the brush that moves with the IMRC valve, and it has a linear signal output in relation to the IMRC valve position when sliding on the board. The Engine Control Module (ECM) monitors the IMRC valve position sensor voltage which represents the IMRC valve position. If the output voltage from the IMRC valve position sensor is higher than a set value, a malfunction is detected and a DTC is stored.
What are the Possible Causes of the DTC P0662 2003 Honda CR-V?
- Faulty Intake Manifold Runner Control (IMRC) Sensor
- Intake Manifold Runner Control harness is open or shorted
- Intake Manifold Runner Control circuit poor electrical connection
How to Fix the DTC P0662 2003 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0662 2003 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0662 2003 Honda CR-V code?
Need more information on how to fix the P0662 2003 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0662 2003 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0662 2003 Honda CR-V Code
1. What are common symptoms of OBDII code P0662 on a 2003 Honda CR-V?
The common symptoms include rough idling, decreased fuel efficiency, and the Check Engine light being illuminated on the dashboard.
2. What does the OBDII code P0662 indicate on a 2003 Honda CR-V?
The code P0662 indicates a high voltage condition in the intake manifold runner control valve position sensor circuit.
3. What are possible causes of OBDII code P0662 on a 2003 Honda CR-V?
Possible causes include a faulty intake manifold runner control valve position sensor, damaged wiring or connectors in the circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the cause of OBDII code P0662 on my 2003 Honda CR-V?
To diagnose the issue, you can use a scan tool to read the code and check the voltage readings from the intake manifold runner control valve position sensor. You may also need to inspect the wiring and connectors for any damage.
5. Can I drive my 2003 Honda CR-V with OBDII code P0662?
It is not recommended to drive your vehicle with the code P0662 present, as it can lead to engine performance issues and potentially cause further damage.
6. How can I repair OBDII code P0662 on a 2003 Honda CR-V?
Repairing the issue may involve replacing the intake manifold runner control valve position sensor, repairing any damaged wiring or connectors, or reprogramming the engine control module.
7. Are there any DIY tips for fixing OBDII code P0662 on a 2003 Honda CR-V?
If you are familiar with automotive repair, you can attempt to inspect the sensor and wiring yourself. However, it is recommended to seek professional help for accurate diagnosis and repair.
8. How much does it cost to fix OBDII code P0662 on a 2003 Honda CR-V?
The cost of fixing the issue can vary depending on the exact cause of the problem, but it may range from a few hundred to over a thousand dollars, including parts and labor.
9. Can OBDII code P0662 on a 2003 Honda CR-V cause further damage if left unrepaired?
Yes, leaving the issue unresolved can lead to reduced engine performance, increased fuel consumption, and potential damage to other engine components over time.
10. How long does it take to repair OBDII code P0662 on a 2003 Honda CR-V?
The repair time can vary depending on the extent of the issue and the availability of parts. In general, it may take a few hours to a full day to diagnose and fix the problem.
Discuss the causes and fixes for P0662 2003 Honda CR-V OBDII Code
Code P0662 2003 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
