P0662 2002 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage
Quick Answer
Engine power is achieved by closing and opening the Intake Manifold Runner Control (IMRC) valve. Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0662 2002 Honda CR-V indicates Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0662 2002 Honda CR-V Description
The Intake Manifold Runner Control (IMRC) valve position sensor is mounted on the IMRC valve shaft and detects an IMRC valve position. The IMRC valve position sensor includes the brush that moves with the IMRC valve, and it has a linear signal output in relation to the IMRC valve position when sliding on the board. The Engine Control Module (ECM) monitors the IMRC valve position sensor voltage which represents the IMRC valve position. If the output voltage from the IMRC valve position sensor is higher than a set value, a malfunction is detected and a DTC is stored.
What are the Possible Causes of the DTC P0662 2002 Honda CR-V?
- Faulty Intake Manifold Runner Control (IMRC) Sensor
- Intake Manifold Runner Control harness is open or shorted
- Intake Manifold Runner Control circuit poor electrical connection
How to Fix the DTC P0662 2002 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0662 2002 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0662 2002 Honda CR-V code?
Need more information on how to fix the P0662 2002 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0662 2002 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0662 2002 Honda CR-V Code
1. What are the common symptoms of OBDII code P0662 on a 2002 Honda CR-V?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the illumination of the check engine light.
2. What does the OBDII code P0662 indicate in a 2002 Honda CR-V?
- The code P0662 indicates a high voltage condition in the circuit of the Intake Manifold Runner Control Valve Position Sensor on a 2002 Honda CR-V.
3. What are the possible causes of OBDII code P0662 on a 2002 Honda CR-V?
- Possible causes include a faulty Intake Manifold Runner Control Valve Position Sensor, damaged wiring or connectors, a malfunctioning intake manifold runner control valve, or a problem with the engine control module.
4. How can I diagnose the issue causing OBDII code P0662 on my 2002 Honda CR-V?
- A thorough diagnosis involving checking the sensor, wiring, connectors, and control valve using a multimeter, visual inspection, and possibly a scan tool is recommended to pinpoint the exact cause.
5. Can I drive my 2002 Honda CR-V with OBDII code P0662?
- It is not recommended to drive the vehicle with this code present, as it can lead to further damage and potentially unsafe driving conditions. It is best to address the issue promptly.
6. How can I repair OBDII code P0662 on my 2002 Honda CR-V?
- Repair options may include replacing the Intake Manifold Runner Control Valve Position Sensor, repairing or replacing damaged wiring or connectors, fixing issues with the intake manifold runner control valve, or reprogramming the engine control module.
7. Are there any DIY tips for fixing OBDII code P0662 on a 2002 Honda CR-V?
- DIY tips may include checking for loose or damaged connections, cleaning connectors, and carefully inspecting wiring for any visible damage before proceeding with more advanced repairs.
8. How much does it typically cost to repair OBDII code P0662 on a 2002 Honda CR-V?
- The cost of repairs can vary depending on the exact cause of the issue, the parts needed, and whether you choose to do the repairs yourself or take your vehicle to a professional mechanic. Costs can range from a few hundred to over a thousand dollars.
9. Can resetting the OBDII code P0662 on a 2002 Honda CR-V fix the issue temporarily?
- Resetting the code may temporarily turn off the check engine light, but it will not fix the underlying issue causing the code. It is essential to diagnose and address the root cause of the problem to prevent further issues.
10. Is it possible for OBDII code P0662 to reappear after repairs on a 2002 Honda CR-V?
- If the root cause of the issue is not properly addressed during repairs, there is a possibility that the code may reappear. It is crucial to diagnose the problem accurately and ensure all necessary repairs are completed to prevent recurrence.
Discuss the causes and fixes for P0662 2002 Honda CR-V OBDII Code
Code P0662 2002 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
