P0661 2006 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage
Quick Answer
Engine power is achieved by closing and opening the Intake Manifold Runner Control (IMRC) valve. Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0661 2006 Honda CR-V indicates Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0661 2006 Honda CR-V Description
The Intake Manifold Runner Control (IMRC) valve position sensor is mounted on the IMRC valve shaft and detects an IMRC valve position. The IMRC valve position sensor includes the brush that moves with the IMRC valve, and it has a linear signal output in relation to the IMRC valve position when sliding on the board. The Engine Control Module (ECM) monitors the IMRC valve position sensor voltage which represents the IMRC valve position. If the output voltage from the IMRC valve position sensor is higher than a set value, a malfunction is detected and a DTC is stored.
What are the Possible Causes of the DTC P0661 2006 Honda CR-V?
- Faulty Intake Manifold Runner Control (IMRC) Sensor
- Intake Manifold Runner Control harness is open or shorted
- Intake Manifold Runner Control circuit poor electrical connection
How to Fix the DTC P0661 2006 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0661 2006 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0661 2006 Honda CR-V code?
Need more information on how to fix the P0661 2006 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0661 2006 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0661 2006 Honda CR-V Code
1. What are the common symptoms of OBDII code P0661 on a 2006 Honda CR-V?
The common symptoms of P0661 on a 2006 Honda CR-V include poor engine performance, rough idling, reduced fuel efficiency, and the Check Engine light illuminating.
2. What does the OBDII code P0661 mean on a 2006 Honda CR-V?
OBDII code P0661 on a 2006 Honda CR-V indicates a low voltage condition in the intake manifold runner control valve position sensor circuit.
3. What are the possible causes of OBDII code P0661 on a 2006 Honda CR-V?
Possible causes of P0661 on a 2006 Honda CR-V include a faulty intake manifold runner control valve, damaged wiring or connectors in the sensor circuit, or a malfunctioning engine control module (ECM).
4. How can I diagnose the intake manifold runner control valve position sensor circuit on my 2006 Honda CR-V?
To diagnose the intake manifold runner control valve position sensor circuit on a 2006 Honda CR-V, you can use a multimeter to test the sensor's resistance, inspect the wiring and connectors for any damage, and check for proper voltage signals.
5. Can I drive my 2006 Honda CR-V with OBDII code P0661?
It is not recommended to drive your 2006 Honda CR-V with OBDII code P0661, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
6. How do I repair OBDII code P0661 on my 2006 Honda CR-V?
To repair P0661 on a 2006 Honda CR-V, you may need to replace the intake manifold runner control valve, repair any damaged wiring or connectors, or reprogram the engine control module (ECM) if necessary.
7. Can a DIY enthusiast fix OBDII code P0661 on a 2006 Honda CR-V?
Depending on your experience and tools, a DIY enthusiast may be able to fix P0661 on a 2006 Honda CR-V by following a repair manual or online guides. However, it is recommended to seek professional help if unsure.
8. How much does it cost to repair OBDII code P0661 on a 2006 Honda CR-V?
The cost to repair P0661 on a 2006 Honda CR-V can vary depending on the cause of the issue, parts needed, and labor rates. It is advisable to obtain quotes from local mechanics or dealerships for an accurate estimate.
9. Will resetting the Check Engine light resolve OBDII code P0661 on my 2006 Honda CR-V?
Simply resetting the Check Engine light will not resolve OBDII code P0661 on a 2006 Honda CR-V. The underlying issue causing the fault code needs to be diagnosed and repaired to prevent further problems.
10. How can I prevent OBDII code P0661 from occurring on my 2006 Honda CR-V in the future?
To prevent OBDII code P0661 from occurring on a 2006 Honda CR-V in the future, it is recommended to perform regular maintenance, address any engine performance issues promptly, and follow the manufacturer's service schedule.
Discuss the causes and fixes for P0661 2006 Honda CR-V OBDII Code
Code P0661 2006 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
