P0661 2005 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage
Quick Answer
Engine power is achieved by closing and opening the Intake Manifold Runner Control (IMRC) valve. Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0661 2005 Honda CR-V indicates Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0661 2005 Honda CR-V Description
The Intake Manifold Runner Control (IMRC) valve position sensor is mounted on the IMRC valve shaft and detects an IMRC valve position. The IMRC valve position sensor includes the brush that moves with the IMRC valve, and it has a linear signal output in relation to the IMRC valve position when sliding on the board. The Engine Control Module (ECM) monitors the IMRC valve position sensor voltage which represents the IMRC valve position. If the output voltage from the IMRC valve position sensor is higher than a set value, a malfunction is detected and a DTC is stored.
What are the Possible Causes of the DTC P0661 2005 Honda CR-V?
- Faulty Intake Manifold Runner Control (IMRC) Sensor
- Intake Manifold Runner Control harness is open or shorted
- Intake Manifold Runner Control circuit poor electrical connection
How to Fix the DTC P0661 2005 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0661 2005 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0661 2005 Honda CR-V code?
Need more information on how to fix the P0661 2005 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0661 2005 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0661 2005 Honda CR-V Code
1. What are the common symptoms of OBDII code P0661 on a 2005 Honda CR-V?
The common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the illumination of the Check Engine Light.
2. What does the OBDII code P0661 indicate on a 2005 Honda CR-V?
OBDII code P0661 indicates a problem with the Intake Manifold Runner Control Valve Position Sensor Circuit, specifically low voltage being detected.
3. What are the possible causes of OBDII code P0661 on a 2005 Honda CR-V?
Possible causes include a faulty intake manifold runner control valve, damaged wiring or connectors in the circuit, a malfunctioning control module, or a vacuum leak in the intake system.
4. How can I diagnose the OBDII code P0661 on my 2005 Honda CR-V?
You can diagnose the code by performing a visual inspection of the intake manifold runner control valve and its wiring, checking for vacuum leaks, testing the voltage at the sensor, and using a scan tool to monitor live data.
5. Can I continue driving my 2005 Honda CR-V with OBDII code P0661?
It is not recommended to continue driving with this code present, as it can lead to further engine damage and decreased performance. It is best to address the issue promptly.
6. How can I repair OBDII code P0661 on my 2005 Honda CR-V?
Repair options include replacing the intake manifold runner control valve, repairing or replacing damaged wiring or connectors, resetting the control module, and fixing any vacuum leaks in the intake system.
7. Will resetting the Check Engine Light resolve OBDII code P0661 on a 2005 Honda CR-V?
While resetting the Check Engine Light may temporarily turn it off, it will not fix the underlying issue causing the code. Proper diagnosis and repair are needed to resolve the problem.
8. Is OBDII code P0661 a common issue with 2005 Honda CR-V vehicles?
While it is not one of the most common OBDII codes, some 2005 Honda CR-V owners have reported experiencing this issue related to the intake manifold runner control valve position sensor circuit.
9. Can a DIY enthusiast fix OBDII code P0661 on a 2005 Honda CR-V?
Depending on your skill level and access to tools, a DIY enthusiast may be able to address this code by following repair guides and procedures. However, professional assistance may be needed for more complex issues.
10. How much does it typically cost to repair OBDII code P0661 on a 2005 Honda CR-V?
The cost of repairing OBDII code P0661 can vary depending on the exact cause of the issue, but it may range from $200 to $600 including parts and labor at a repair shop.
Discuss the causes and fixes for P0661 2005 Honda CR-V OBDII Code
Code P0661 2005 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
