P0661 2004 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage
Quick Answer
Engine power is achieved by closing and opening the Intake Manifold Runner Control (IMRC) valve. Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0661 2004 Honda CR-V indicates Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0661 2004 Honda CR-V Description
The Intake Manifold Runner Control (IMRC) valve position sensor is mounted on the IMRC valve shaft and detects an IMRC valve position. The IMRC valve position sensor includes the brush that moves with the IMRC valve, and it has a linear signal output in relation to the IMRC valve position when sliding on the board. The Engine Control Module (ECM) monitors the IMRC valve position sensor voltage which represents the IMRC valve position. If the output voltage from the IMRC valve position sensor is higher than a set value, a malfunction is detected and a DTC is stored.
What are the Possible Causes of the DTC P0661 2004 Honda CR-V?
- Faulty Intake Manifold Runner Control (IMRC) Sensor
- Intake Manifold Runner Control harness is open or shorted
- Intake Manifold Runner Control circuit poor electrical connection
How to Fix the DTC P0661 2004 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0661 2004 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0661 2004 Honda CR-V code?
Need more information on how to fix the P0661 2004 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0661 2004 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0661 2004 Honda CR-V Code
1. What are the common symptoms of OBDII code P0661 in a 2004 Honda CR-V?
- Common symptoms include poor engine performance, rough idling, reduced fuel efficiency, and the illumination of the Check Engine Light.
2. What does the OBDII code P0661 indicate in a 2004 Honda CR-V?
- OBDII code P0661 indicates a problem with the Intake Manifold Runner Control Valve Position Sensor Circuit having low voltage.
3. What are the possible causes of OBDII code P0661 in a 2004 Honda CR-V?
- Possible causes include a faulty Intake Manifold Runner Control (IMRC) valve, damaged wiring or connectors, a malfunctioning IMRC valve position sensor, or a problem in the engine control module (ECM).
4. How can I diagnose the issue causing OBDII code P0661 in my 2004 Honda CR-V?
- You can diagnose the issue by performing a visual inspection of the IMRC system components, testing the IMRC valve position sensor with a multimeter, and checking for any damaged wiring or connectors.
5. Can I continue to drive my 2004 Honda CR-V with OBDII code P0661?
- It is not recommended to continue driving with OBDII code P0661 as it can lead to further engine damage and decreased performance. It is best to address the issue promptly.
6. How can I repair OBDII code P0661 in my 2004 Honda CR-V?
- Repair options include replacing the faulty IMRC valve, repairing or replacing damaged wiring or connectors, and resetting the ECM to clear the code.
7. Will resetting the ECM clear OBDII code P0661 in my 2004 Honda CR-V?
- Resetting the ECM may temporarily clear the code, but if the underlying issue causing P0661 is not addressed, the code is likely to reappear.
8. How much does it typically cost to repair OBDII code P0661 in a 2004 Honda CR-V?
- The cost of repair can vary depending on the specific cause of the issue, but it can range from $200 to $500, including parts and labor.
9. Can a DIY enthusiast fix OBDII code P0661 in a 2004 Honda CR-V?
- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address the issue causing P0661, especially if it involves simple tasks like replacing a sensor or checking wiring connections.
10. Is OBDII code P0661 a common issue in 2004 Honda CR-V vehicles?
- While not extremely common, OBDII code P0661 can occur in 2004 Honda CR-V vehicles due to issues with the Intake Manifold Runner Control system.
Discuss the causes and fixes for P0661 2004 Honda CR-V OBDII Code
Code P0661 2004 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
