P0661 2003 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage
Quick Answer
Engine power is achieved by closing and opening the Intake Manifold Runner Control (IMRC) valve. Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0661 2003 Honda CR-V indicates Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0661 2003 Honda CR-V Description
The Intake Manifold Runner Control (IMRC) valve position sensor is mounted on the IMRC valve shaft and detects an IMRC valve position. The IMRC valve position sensor includes the brush that moves with the IMRC valve, and it has a linear signal output in relation to the IMRC valve position when sliding on the board. The Engine Control Module (ECM) monitors the IMRC valve position sensor voltage which represents the IMRC valve position. If the output voltage from the IMRC valve position sensor is higher than a set value, a malfunction is detected and a DTC is stored.
What are the Possible Causes of the DTC P0661 2003 Honda CR-V?
- Faulty Intake Manifold Runner Control (IMRC) Sensor
- Intake Manifold Runner Control harness is open or shorted
- Intake Manifold Runner Control circuit poor electrical connection
How to Fix the DTC P0661 2003 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0661 2003 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0661 2003 Honda CR-V code?
Need more information on how to fix the P0661 2003 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0661 2003 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0661 2003 Honda CR-V Code
1. What are the common symptoms of OBDII code P0661 in a 2003 Honda CR-V?
The common symptoms of code P0661 include rough idling, reduced engine performance, stalling, and the Check Engine Light illuminating on the dashboard.
2. What does the OBDII code P0661 for a 2003 Honda CR-V indicate?
Code P0661 indicates a problem with the Intake Manifold Runner Control Valve Position Sensor Circuit showing low voltage.
3. What are the possible causes of OBDII code P0661 in a 2003 Honda CR-V?
Possible causes of P0661 in a 2003 Honda CR-V could include a faulty intake manifold runner control valve, damaged wiring or connectors in the circuit, or a malfunctioning intake manifold runner control module.
4. How can I diagnose the cause of OBDII code P0661 in my 2003 Honda CR-V?
To diagnose the cause of P0661, you can start by inspecting the intake manifold runner control valve, checking for damaged wiring or connectors, and using a multimeter to test the voltage in the sensor circuit.
5. Can I continue driving my 2003 Honda CR-V with OBDII code P0661?
It is not recommended to continue driving your Honda CR-V with code P0661 as it can lead to further engine damage and potential safety issues. It is best to address the issue promptly.
6. Is it possible to repair OBDII code P0661 in a 2003 Honda CR-V without professional help?
Repairing code P0661 may require advanced automotive knowledge and tools. While some DIY enthusiasts may be able to tackle the issue, it is advisable to seek professional help for an accurate diagnosis and repair.
7. How much does it typically cost to repair OBDII code P0661 in a 2003 Honda CR-V?
The cost of repairing code P0661 can vary depending on the root cause of the issue and labor rates in your area. It is recommended to get multiple quotes from different automotive shops for an accurate estimate.
8. Can a faulty Intake Manifold Runner Control Valve Position Sensor Circuit cause other issues in a 2003 Honda CR-V?
Yes, a faulty sensor circuit can cause drivability issues like poor acceleration, reduced fuel efficiency, and potential engine misfires in a 2003 Honda CR-V.
9. Are there any preventative measures to avoid OBDII code P0661 in a 2003 Honda CR-V?
Regular maintenance, including keeping the intake system clean and inspecting the sensor circuit during routine servicing, can help prevent issues leading to code P0661 in a 2003 Honda CR-V.
10. How urgent is it to address OBDII code P0661 in a 2003 Honda CR-V?
It is recommended to address code P0661 promptly to prevent further damage to the engine and ensure the vehicle operates safely and efficiently.
Discuss the causes and fixes for P0661 2003 Honda CR-V OBDII Code
Code P0661 2003 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
