P0661 2002 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage
Quick Answer
Engine power is achieved by closing and opening the Intake Manifold Runner Control (IMRC) valve. Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0661 2002 Honda CR-V indicates Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Sensor, Intake Manifold Runner Control harness is open or shorted, Intake Manifold Runner Control circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0661 2002 Honda CR-V Description
The Intake Manifold Runner Control (IMRC) valve position sensor is mounted on the IMRC valve shaft and detects an IMRC valve position. The IMRC valve position sensor includes the brush that moves with the IMRC valve, and it has a linear signal output in relation to the IMRC valve position when sliding on the board. The Engine Control Module (ECM) monitors the IMRC valve position sensor voltage which represents the IMRC valve position. If the output voltage from the IMRC valve position sensor is higher than a set value, a malfunction is detected and a DTC is stored.
What are the Possible Causes of the DTC P0661 2002 Honda CR-V?
- Faulty Intake Manifold Runner Control (IMRC) Sensor
- Intake Manifold Runner Control harness is open or shorted
- Intake Manifold Runner Control circuit poor electrical connection
How to Fix the DTC P0661 2002 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0661 2002 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0661 2002 Honda CR-V code?
Need more information on how to fix the P0661 2002 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0661 2002 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0661 2002 Honda CR-V Code
1. What are the common symptoms of OBDII code P0661 on a 2002 Honda CR-V?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the Check Engine light illuminating.
2. What causes the Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage error code on a 2002 Honda CR-V?
- The P0661 code is typically triggered by a faulty intake manifold runner control valve position sensor, wiring issues, or a defective PCM.
3. How can I diagnose the cause of OBDII code P0661 on my 2002 Honda CR-V?
- A thorough diagnostic scan using an OBDII scanner can help pinpoint the exact cause by checking the sensor's voltage readings and inspecting the wiring for any damages.
4. Can a dirty intake manifold cause the P0661 code on a 2002 Honda CR-V?
- While a dirty intake manifold may affect engine performance, it is not a common cause of the P0661 code. Focus on checking the sensor and related components first.
5. What are the repair options for resolving the Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage code on a 2002 Honda CR-V?
- Repair options include replacing the faulty intake manifold runner control valve position sensor, repairing any damaged wiring, or reprogramming the PCM if necessary.
6. Is it safe to continue driving my 2002 Honda CR-V with the P0661 code present?
- It is not recommended to continue driving with the P0661 code as it can lead to further engine issues and potential damage if left unresolved.
7. Can I reset the Check Engine light after fixing the issue causing the P0661 code on my 2002 Honda CR-V?
- Yes, once the underlying issue triggering the code has been fixed, you can reset the Check Engine light using an OBDII scanner to clear the error code.
8. How much does it typically cost to repair the Intake Manifold Runner Control Valve Position Sensor Circuit Low Voltage issue on a 2002 Honda CR-V?
- The cost of repair can vary depending on the exact cause, but it may range from $200 to $500 including parts and labor.
9. Are there any preventive maintenance steps I can take to avoid the P0661 code on my 2002 Honda CR-V in the future?
- Regularly inspecting and cleaning the intake manifold components, as well as ensuring proper wiring connections, can help prevent issues leading to the P0661 code.
Discuss the causes and fixes for P0661 2002 Honda CR-V OBDII Code
Code P0661 2002 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
