P0660 2011 Ford Fusion Code - Intake Manifold Tuning Valve Control Circuit Open Bank 1
Quick Answer
The Powertrain Control Module (PCM) continuously monitor the Intake Manifold Tuning Valve (IMTV) system during Key ON Engine OFF (KOEO) or Key ON Engine Running (KOER) self-test. Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve harness is open or shorted, Intake Manifold Tuning Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0660 2011 Ford Fusion indicates Intake Manifold Tuning Valve Control Circuit Open Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve harness is open or shorted, Intake Manifold Tuning Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0660 2011 Ford Fusion Description
What are the Possible Causes of the DTC P0660 2011 Ford Fusion?
- Faulty Intake Manifold Tuning Valve (IMTV)
- Intake Manifold Tuning Valve harness is open or shorted
- Intake Manifold Tuning Valve circuit poor electrical connection
How to Fix the DTC P0660 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0660 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0660 2011 Ford Fusion code?
Need more information on how to fix the P0660 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0660 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0660 2011 Ford Fusion Code
What does the OBDII code P0660 mean for a 2011 Ford Fusion?
The P0660 code indicates an "Intake Manifold Tuning Valve Control Circuit Open" in Bank 1, which means there’s an issue with the control circuit for the intake manifold tuning valve.
What are the common symptoms of code P0660 in a 2011 Ford Fusion?
Symptoms may include decreased engine performance, reduced fuel efficiency, rough idling, and an illuminated Check Engine Light.
What causes the P0660 code in a 2011 Ford Fusion?
Common causes include a faulty intake manifold tuning valve, damaged wiring or connectors in the control circuit, or a malfunctioning PCM (Powertrain Control Module).
How do I diagnose code P0660 on a 2011 Ford Fusion?
Start by inspecting the wiring and connectors for damage or corrosion. Test the intake manifold tuning valve and ensure the circuit is receiving proper voltage. If needed, use a diagnostic scanner for further troubleshooting.
Can I drive my 2011 Ford Fusion with a P0660 code?
While the car may still be drivable, performance issues and reduced fuel efficiency could worsen over time. It’s best to address the problem promptly to avoid further damage.
How do I fix the P0660 code on a 2011 Ford Fusion?
Repairs may include replacing the intake manifold tuning valve, repairing or replacing damaged wiring or connectors, and in some cases, reprogramming or replacing the PCM.
Does the P0660 code affect emissions in a 2011 Ford Fusion?
Yes, the P0660 code can impact emissions as it affects how air flows through the intake manifold, potentially leading to incomplete combustion.
How much does it cost to repair the P0660 code on a 2011 Ford Fusion?
Repair costs vary depending on the exact issue but typically range from $100 to $500, including parts and labor.
Can a dirty intake manifold cause code P0660 on a 2011 Ford Fusion?
While dirt or carbon buildup in the intake manifold can affect performance, code P0660 specifically relates to an electrical issue with the tuning valve’s control circuit rather than physical obstruction.
Does the P0660 code indicate a problem with Bank 1 on a 2011 Ford Fusion?
Yes, the code applies to Bank 1, which refers to the side of the engine containing cylinder 1 in the vehicle.
Discuss the causes and fixes for P0660 2011 Ford Fusion OBDII Code
Code P0660 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
