P0660 2010 Ford Fusion Code - Intake Manifold Tuning Valve Control Circuit Open Bank 1
Quick Answer
The Powertrain Control Module (PCM) continuously monitor the Intake Manifold Tuning Valve (IMTV) system during Key ON Engine OFF (KOEO) or Key ON Engine Running (KOER) self-test. Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve harness is open or shorted, Intake Manifold Tuning Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0660 2010 Ford Fusion indicates Intake Manifold Tuning Valve Control Circuit Open Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve harness is open or shorted, Intake Manifold Tuning Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0660 2010 Ford Fusion Description
What are the Possible Causes of the DTC P0660 2010 Ford Fusion?
- Faulty Intake Manifold Tuning Valve (IMTV)
- Intake Manifold Tuning Valve harness is open or shorted
- Intake Manifold Tuning Valve circuit poor electrical connection
How to Fix the DTC P0660 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0660 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0660 2010 Ford Fusion code?
Need more information on how to fix the P0660 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0660 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0660 2010 Ford Fusion Code
1. What does the OBDII code P0660 mean for a 2010 Ford Fusion?
The P0660 code indicates an "Intake Manifold Tuning Valve Control Circuit Open" on Bank 1, meaning there is an issue with the electrical circuit controlling the intake manifold tuning valve.
2. What are the common symptoms of the P0660 code in a 2010 Ford Fusion?
Symptoms may include reduced engine performance, poor fuel efficiency, rough idling, illuminated Check Engine Light, and lack of power at certain RPM ranges.
3. What causes the P0660 code to appear in a 2010 Ford Fusion?
Common causes include a faulty intake manifold tuning valve, damaged wiring or connectors in the valve circuit, a failed powertrain control module (PCM), or corrosion in electrical connections.
4. Can I drive my 2010 Ford Fusion with the P0660 code?
While the car may still be drivable, you might experience reduced performance and fuel efficiency. It's best to address the issue promptly to avoid potential damage.
5. How do I diagnose the P0660 code on a 2010 Ford Fusion?
Diagnosis involves checking the wiring and connectors for damage, testing the intake manifold tuning valve for proper operation, and using a multimeter to verify circuit continuity and voltage.
6. How do I fix the P0660 code on a 2010 Ford Fusion?
Repairs may include replacing the intake manifold tuning valve, repairing damaged wiring or connectors, or reprogramming or replacing the PCM if it's defective.
7. What tools are needed to troubleshoot the P0660 code on a 2010 Ford Fusion?
Tools needed include an OBDII scanner, a multimeter for electrical testing, and basic hand tools for inspecting and replacing components.
8. What is the function of the intake manifold tuning valve in a 2010 Ford Fusion?
The intake manifold tuning valve optimizes airflow to the engine by adjusting the length of the intake runners, improving performance and efficiency at different RPM ranges.
9. How much does it cost to repair the P0660 code in a 2010 Ford Fusion?
Repair costs vary depending on the issue. Replacing the intake manifold tuning valve can cost $200–$500, while wiring repairs or PCM replacements may add to the expense.
10. Can a dirty or clogged intake manifold cause the P0660 code in a 2010 Ford Fusion?
While not a primary cause, a dirty or clogged intake manifold could lead to improper valve operation, contributing to the code. Cleaning the manifold may help in some cases.
Discuss the causes and fixes for P0660 2010 Ford Fusion OBDII Code
Code P0660 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
