P0659 Dodge Code - Actuator Supply Voltage 'A' Circuit High
Quick Answer
The Powertrain Control Module (PCM) monitors the transmission solenoid circuits by supplying voltage to the solenoids through this circuit, then checking for voltage returning from the solenoids through each of the individual solenoid control wires. Common causes include Faulty Transmission Solenoids, Transmission Solenoids harness is open or shorted, Transmission Solenoids circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0659 Dodge indicates Actuator Supply Voltage 'A' Circuit High.
- Common causes
- Common causes include Faulty Transmission Solenoids, Transmission Solenoids harness is open or shorted, Transmission Solenoids circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0659 Dodge Description
What are the Possible Causes of the DTC P0659 Dodge?
- Faulty Transmission Solenoids
- Transmission Solenoids harness is open or shorted
- Transmission Solenoids circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0659 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0659 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0659 Dodge code?
Need more information on how to fix the P0659 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0659 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0659 Dodge Code
1. What are the common symptoms of OBDII code P0659 in a Dodge vehicle?
The common symptoms of OBDII code P0659 (Actuator Supply Voltage 'A' Circuit High) in a Dodge vehicle may include engine stalling, poor engine performance, illuminated Check Engine light, and difficulties starting the vehicle.
2. What can cause the OBDII code P0659 in a Dodge vehicle?
The OBDII code P0659 in a Dodge vehicle can be caused by issues such as a faulty actuator supply voltage sensor, damaged wiring or connectors in the actuator supply voltage circuit, or a malfunctioning engine control module (ECM).
3. How do I diagnose the OBDII code P0659 in my Dodge vehicle?
To diagnose the OBDII code P0659 in your Dodge vehicle, you can use a diagnostic scanner to retrieve the trouble codes, perform a visual inspection of the wiring and connectors in the actuator supply voltage circuit, and test the actuator supply voltage sensor for proper functionality.
4. Can I drive my Dodge vehicle with the OBDII code P0659?
It is not recommended to drive your Dodge vehicle with the OBDII code P0659 present, as it can lead to further damage to the engine or other components. It is best to address the issue promptly to avoid potential safety hazards.
5. How can I repair the OBDII code P0659 in my Dodge vehicle?
To repair the OBDII code P0659 in your Dodge vehicle, you may need to replace the actuator supply voltage sensor, repair or replace any damaged wiring or connectors in the circuit, or reprogram the engine control module (ECM) if necessary.
6. Is it possible to reset the OBDII code P0659 in a Dodge vehicle without fixing the underlying issue?
While you can clear the OBDII code P0659 using a diagnostic scanner, it is crucial to address the underlying issue causing the fault code to prevent future problems and ensure the proper functioning of your vehicle.
7. Can a DIY enthusiast fix the OBDII code P0659 in a Dodge vehicle?
Depending on your mechanical skills and experience, a DIY enthusiast may be able to diagnose and repair the OBDII code P0659 in a Dodge vehicle. However, complex issues or electrical problems may require professional assistance.
8. How much does it typically cost to repair the OBDII code P0659 in a Dodge vehicle?
The cost to repair the OBDII code P0659 in a Dodge vehicle can vary depending on the root cause of the issue, the extent of the repairs needed, and whether you choose to do the repairs yourself or seek professional help. Costs may range from a few hundred to a few thousand dollars.
9. Will the OBDII code P0659 cause my Dodge vehicle to fail an emissions test?
Yes, the OBDII code P0659 can cause your Dodge vehicle to fail an emissions test, as it indicates a problem with the actuator supply voltage circuit that can impact the vehicle's emissions control system.
10. How urgent is it to address the OBDII code P0659 in my Dodge vehicle?
It is recommended to address the OBDII code P0659 in your Dodge vehicle as soon as possible to prevent potential damage to the engine or other components, ensure the vehicle's proper functioning, and avoid safety risks while driving.
Discuss the causes and fixes for P0659 Dodge OBDII Code
Code P0659 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
