AutoCodes – GMC – P0658 2015 GMC Sierra

P0658 2015 GMC Sierra Code - Actuator High Control Circuit Group 1 Low Voltage

Quick Answer

The Transmission Control Module (TCM) receives information from a variety of sensors, switches, and serial data information from other control modules. Common causes include Faulty Transmission Control Solenoid Valve, Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0658 2015 GMC Sierra indicates Actuator High Control Circuit Group 1 Low Voltage.
Common causes: Common causes include Faulty Transmission Control Solenoid Valve, Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 336

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 18, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0658 2015 GMC Sierra Description

The Transmission Control Module (TCM) receives information from a variety of sensors, switches, and serial data information from other control modules. This information is used to control a combination of solenoid valves to obtain the correct line pressure, gear ratio, and torque converter clutch operation. The Transmission Control Solenoid Valves are electro-mechanically operated valves. The valves are controlled by an electric current through the solenoid. The TCM high side driver 1 is located inside of the control solenoid valve assembly which has no serviceable parts. The high side driver 1 provides power to the Transmission Control Module pressure control solenoids and shift solenoids. The Diagnostic Trouble Code (DTC) will be set when the TCM detects an internal open or short to ground on the high side driver 1 for 1 s.

OBDII Code P0658 2015 GMC Sierra - Actuator High Control Circuit Group 1 Low Voltage - AutoCodes.com — P0658 2015 GMC Sierra Code - Actuator High Control Circuit Group 1 Low Voltage

What does this mean?

What are the Possible Causes of the DTC P0658 2015 GMC Sierra?

Faulty Transmission Control Solenoid Valve
Faulty Transmission Control Module (TCM)
Transmission Control Module harness is open or shorted
Transmission Control Module circuit poor electrical connection

How to Fix the DTC P0658 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0658 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0658 2015 GMC Sierra code?

Need more information on how to fix the P0658 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0658 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0658 2015 GMC Sierra Code

1. What are the common symptoms of OBDII code P0658 in a 2015 GMC Sierra?

The common symptoms of OBDII code P0658 in a 2015 GMC Sierra include rough idling, poor engine performance, and the illumination of the Check Engine Light.

2. What does the OBDII code P0658 for Actuator High Control Circuit Group 1 Low Voltage mean in a 2015 GMC Sierra?

OBDII code P0658 indicates a low voltage condition in the Actuator High Control Circuit Group 1 in a 2015 GMC Sierra.

3. What are the possible causes of OBDII code P0658 in a 2015 GMC Sierra?

Possible causes of OBDII code P0658 in a 2015 GMC Sierra include a faulty actuator control module, damaged wiring or connectors, or a malfunctioning actuator.

4. How can I diagnose OBDII code P0658 in my 2015 GMC Sierra?

To diagnose OBDII code P0658 in a 2015 GMC Sierra, you can use an OBDII scanner to retrieve the code and then inspect the actuator control module, wiring, and connectors for any signs of damage or corrosion.

5. How serious is OBDII code P0658 in a 2015 GMC Sierra?

OBDII code P0658 should be addressed promptly as it can lead to poor engine performance and potential damage to other engine components if left unresolved in a 2015 GMC Sierra.

6. Can I drive my 2015 GMC Sierra with OBDII code P0658?

It is not recommended to drive your 2015 GMC Sierra with OBDII code P0658 as it can cause further damage to the engine and reduce overall performance.

7. What are some repair tips for fixing OBDII code P0658 in a 2015 GMC Sierra?

Repair tips for fixing OBDII code P0658 in a 2015 GMC Sierra include checking and repairing any damaged wiring or connectors, replacing the faulty actuator control module, and clearing the trouble code.

8. How much does it cost to fix OBDII code P0658 in a 2015 GMC Sierra?

The cost to fix OBDII code P0658 in a 2015 GMC Sierra can vary depending on the specific issue causing the code, but it may range from a few hundred to a few thousand dollars for parts and labor.

9. Can I reset OBDII code P0658 in my 2015 GMC Sierra without repairing the issue?

While you can reset OBDII code P0658 in a 2015 GMC Sierra using an OBDII scanner, it is not recommended to do so without addressing the underlying problem, as the code is likely to reappear.

10. How can I prevent OBDII code P0658 from appearing in my 2015 GMC Sierra?

To prevent OBDII code P0658 from appearing in a 2015 GMC Sierra, it is essential to perform regular maintenance checks, including inspecting the actuator control module and related components for any signs of wear or damage.