P0657 2010 Ford Fusion Code - Actuator Supply Voltage 'A' Circuit Open
Quick Answer
The Powertrain Control Module (PCM) monitors the transmission solenoid circuits by supplying voltage to the solenoids through this circuit, then checking for voltage returning from the solenoids through each of the individual solenoid control wires. Common causes include Faulty Transmission Solenoids, Transmission Solenoids harness is open or shorted, Transmission Solenoids circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0657 2010 Ford Fusion indicates Actuator Supply Voltage 'A' Circuit Open.
- Common causes
- Common causes include Faulty Transmission Solenoids, Transmission Solenoids harness is open or shorted, Transmission Solenoids circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0657 2010 Ford Fusion Description
However, DTC P0657 sets when ALL of the solenoids do not have the correct voltage returning to the PCM all at the same time.
What are the Possible Causes of the DTC P0657 2010 Ford Fusion?
- Faulty Transmission Solenoids
- Transmission Solenoids harness is open or shorted
- Transmission Solenoids circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0657 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0657 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0657 2010 Ford Fusion code?
Need more information on how to fix the P0657 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0657 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0657 2010 Ford Fusion Code
1. What does OBDII code P0657 mean for a 2010 Ford Fusion?
The P0657 code indicates a problem with the Actuator Supply Voltage 'A' Circuit Open on a 2010 Ford Fusion.
2. What are the common symptoms of OBDII code P0657 on a 2010 Ford Fusion?
Common symptoms of P0657 may include engine stalling, rough idling, poor acceleration, and in some cases, the vehicle may not start.
3. What are the possible causes of OBDII code P0657 on a 2010 Ford Fusion?
Potential causes of code P0657 include a faulty actuator supply voltage sensor, damaged wiring or connectors in the circuit, or a malfunctioning PCM (Powertrain Control Module).
4. How can I diagnose OBDII code P0657 on my 2010 Ford Fusion?
Diagnosing code P0657 typically involves inspecting the actuator supply voltage sensor, checking the wiring for any damage, and testing the PCM for proper function using a diagnostic scanner.
5. Can I still drive my 2010 Ford Fusion with OBDII code P0657?
It is not recommended to drive your vehicle with code P0657 as it can lead to further damage and potentially unsafe driving conditions. It's best to address the issue promptly.
6. How can I repair OBDII code P0657 on a 2010 Ford Fusion?
To repair code P0657, you may need to replace the faulty actuator supply voltage sensor, repair any damaged wiring or connectors, or reprogram the PCM if necessary.
7. Is it possible to clear OBDII code P0657 on a 2010 Ford Fusion without fixing the issue?
While you can clear the code temporarily, it will likely reappear if the underlying issue is not addressed. It's important to fix the root cause of the problem to prevent further issues.
8. Will OBDII code P0657 on a 2010 Ford Fusion cause a check engine light to illuminate?
Yes, code P0657 will trigger the check engine light on your 2010 Ford Fusion to alert you to a problem with the actuator supply voltage 'A' circuit.
9. How long does it typically take to repair OBDII code P0657 on a 2010 Ford Fusion?
The repair time for code P0657 can vary depending on the exact cause of the issue. Simple repairs like sensor replacement can be done relatively quickly, while more complex issues may take longer.
10. Can I fix OBDII code P0657 on a 2010 Ford Fusion myself, or should I take it to a professional mechanic?
If you have experience with automotive repairs and diagnostics, you may be able to address code P0657 yourself. However, if you're unsure or unfamiliar with the process, it's best to seek assistance from a professional mechanic to ensure the issue is properly resolved.
Discuss the causes and fixes for P0657 2010 Ford Fusion OBDII Code
Code P0657 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
