P0657 2008 Ford Fusion Code - Actuator Supply Voltage 'A' Circuit Open
Quick Answer
The Powertrain Control Module (PCM) monitors the transmission solenoid circuits by supplying voltage to the solenoids through this circuit, then checking for voltage returning from the solenoids through each of the individual solenoid control wires. Common causes include Faulty Transmission Solenoids, Transmission Solenoids harness is open or shorted, Transmission Solenoids circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0657 2008 Ford Fusion indicates Actuator Supply Voltage 'A' Circuit Open.
- Common causes
- Common causes include Faulty Transmission Solenoids, Transmission Solenoids harness is open or shorted, Transmission Solenoids circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0657 2008 Ford Fusion Description
However, DTC P0657 sets when ALL of the solenoids do not have the correct voltage returning to the PCM all at the same time.
What are the Possible Causes of the DTC P0657 2008 Ford Fusion?
- Faulty Transmission Solenoids
- Transmission Solenoids harness is open or shorted
- Transmission Solenoids circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0657 2008 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0657 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0657 2008 Ford Fusion code?
Need more information on how to fix the P0657 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0657 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0657 2008 Ford Fusion Code
1. What are the common symptoms of OBDII code P0657 in a 2008 Ford Fusion?
The common symptoms include the check engine light being illuminated on the dashboard, reduced engine performance, and potential stalling or rough idling.
2. What does the OBDII code P0657 in a 2008 Ford Fusion mean?
The code P0657 indicates a problem with the Actuator Supply Voltage 'A' Circuit being open, meaning there is a disruption in the voltage supply to certain components.
3. What are the possible causes of OBDII code P0657 in a 2008 Ford Fusion?
Possible causes include damaged wiring or connectors in the circuit, a faulty actuator, a malfunctioning powertrain control module (PCM), or a drained battery.
4. How can I diagnose the cause of OBDII code P0657 in my 2008 Ford Fusion?
Diagnosing the issue involves checking the wiring and connectors for damage, testing the actuator for proper function, scanning the PCM for related trouble codes, and verifying the battery's health.
5. Can I continue to drive my 2008 Ford Fusion with OBDII code P0657 present?
It is not recommended to drive the vehicle with this code present, as it can lead to further damage and potentially unsafe driving conditions. It is best to address the issue promptly.
6. How can I repair OBDII code P0657 in my 2008 Ford Fusion?
Repairing the issue may involve repairing or replacing damaged wiring, connectors, or the actuator, resetting the PCM, and ensuring proper voltage supply to the affected components.
7. Is OBDII code P0657 a serious issue in a 2008 Ford Fusion?
While the severity of the issue may vary, it is important to address this code promptly to prevent further damage to the vehicle and ensure optimal performance.
8. Can a DIY enthusiast fix OBDII code P0657 in a 2008 Ford Fusion?
Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to diagnose and repair this issue themselves. However, professional assistance is recommended for complex repairs.
9. How much does it typically cost to repair OBDII code P0657 in a 2008 Ford Fusion?
The cost of repairing this code can vary depending on the specific cause of the issue, the labor rates in your area, and whether any parts need to be replaced. It is advisable to obtain quotes from reputable mechanics.
10. Are there any preventive measures to avoid OBDII code P0657 in a 2008 Ford Fusion?
Regular maintenance, such as checking the wiring integrity, keeping the battery in good condition, and addressing any electrical issues promptly, can help prevent the occurrence of this code.
Discuss the causes and fixes for P0657 2008 Ford Fusion OBDII Code
Code P0657 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
