P0657 2006 Ford Fusion Code - Actuator Supply Voltage 'A' Circuit Open
Quick Answer
The Powertrain Control Module (PCM) monitors the transmission solenoid circuits by supplying voltage to the solenoids through this circuit, then checking for voltage returning from the solenoids through each of the individual solenoid control wires. Common causes include Faulty Transmission Solenoids, Transmission Solenoids harness is open or shorted, Transmission Solenoids circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0657 2006 Ford Fusion indicates Actuator Supply Voltage 'A' Circuit Open.
- Common causes
- Common causes include Faulty Transmission Solenoids, Transmission Solenoids harness is open or shorted, Transmission Solenoids circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0657 2006 Ford Fusion Description
However, DTC P0657 sets when ALL of the solenoids do not have the correct voltage returning to the PCM all at the same time.
What are the Possible Causes of the DTC P0657 2006 Ford Fusion?
- Faulty Transmission Solenoids
- Transmission Solenoids harness is open or shorted
- Transmission Solenoids circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0657 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0657 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0657 2006 Ford Fusion code?
Need more information on how to fix the P0657 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0657 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0657 2006 Ford Fusion Code
1. What does the OBDII code P0657 mean for a 2006 Ford Fusion?
The P0657 code indicates an issue with the Actuator Supply Voltage 'A' Circuit, specifically that the circuit is open or not supplying power as expected.
2. What are the common symptoms of code P0657 in a 2006 Ford Fusion?
Symptoms may include reduced engine performance, failure of certain systems like the throttle or transmission, a check engine light, and erratic vehicle behavior.
3. What causes the P0657 code to appear on a 2006 Ford Fusion?
Possible causes include damaged wiring or connectors in the actuator supply circuit, a blown fuse, a failed powertrain control module (PCM), or a defective actuator.
4. How do I diagnose the P0657 code on a 2006 Ford Fusion?
Start by checking the wiring and connectors in the actuator circuit for damage, then test the circuit for proper voltage. If no issues are found, inspect the PCM and actuators for faults.
5. Can I drive my 2006 Ford Fusion with a P0657 code?
Driving with a P0657 code is not recommended, as it can lead to reduced performance or failure of critical systems, potentially causing unsafe driving conditions.
6. How much does it cost to fix the P0657 code on a 2006 Ford Fusion?
Repair costs vary depending on the issue, but fixing a wiring problem might cost $100-$300, while replacing the PCM or actuator could be significantly more expensive.
7. Can a blown fuse cause the P0657 code in a 2006 Ford Fusion?
Yes, a blown fuse in the actuator supply circuit can cause the P0657 code by interrupting the voltage supply.
8. Is the P0657 code related to other diagnostic trouble codes?
Yes, the P0657 code can sometimes appear with other actuator or voltage-related codes, which may help pinpoint the root cause of the issue.
9. What actuators are affected by the P0657 code in a 2006 Ford Fusion?
The affected actuators could include components like the throttle body, transmission solenoids, or other electronically controlled devices depending on the specific circuit involved.
10. What tools are needed to troubleshoot the P0657 code on a 2006 Ford Fusion?
A multimeter to check voltage and continuity, an OBDII scanner to read and clear codes, and possibly a wiring diagram for the actuator circuit are essential tools for troubleshooting.
Discuss the causes and fixes for P0657 2006 Ford Fusion OBDII Code
Code P0657 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
