AutoCodes – Jeep – P0652 Jeep

P0652 Jeep Code - 5 Volt Sensor Reference 2 Circuit Low

Quick Answer

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0652 Jeep indicates 5 Volt Sensor Reference 2 Circuit Low.
Common causes: Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 17,200

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 02, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0652 Jeep Description

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Each reference bus provided 5-volt reference circuit for more than one sensor. Therefore, a fault condition on one 5-volt reference circuit will affect the other 5-volt reference circuits connected to the reference bus. The control module monitors the voltage on the 5-volt reference buses.

OBDII Code P0652 Jeep - 5 Volt Sensor Reference 2 Circuit Low - AutoCodes.com — P0652 Jeep Code - 5 Volt Sensor Reference 2 Circuit Low

What does this mean?

What are the Possible Causes of the DTC P0652 Jeep?

Faulty Engine Control Module (ECM)
ECM harness is open or shorted
ECM circuit poor electrical connection
Shorted sensor on 5 volt circuit

How to Fix the DTC P0652 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0652 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0652 Jeep code?

Need more information on how to fix the P0652 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0652 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0652 Jeep Code

1. What are the common symptoms of OBDII code P0652 in a Jeep related to the 5 Volt Sensor Reference 2 Circuit Low?

The common symptoms include check engine light illumination, loss of engine power, rough idling, and possibly stalling.

2. What does the OBDII code P0652 Jeep indicate regarding the 5 Volt Sensor Reference 2 Circuit?

The code indicates that the voltage signal from the 5 Volt Sensor Reference 2 Circuit is lower than the expected range.

3. What are the possible causes of OBDII code P0652 in a Jeep?

Possible causes include a faulty sensor, damaged wiring or connectors in the circuit, a defective Engine Control Module (ECM), or a short circuit.

4. How can I diagnose the cause of OBDII code P0652 in my Jeep?

Diagnosis typically involves checking the sensor and its wiring for any visible damage or corrosion, testing the sensor's voltage output, and inspecting the ECM for any signs of malfunction.

5. Can driving with OBDII code P0652 in a Jeep cause further damage?

Continued driving with this code may lead to poor engine performance, reduced fuel efficiency, and potential damage to other engine components over time.

6. Is it safe to continue driving my Jeep with the OBDII code P0652 present?

It is not recommended to drive the vehicle with this code active, as it can affect the engine's performance and reliability.

7. How can I repair OBDII code P0652 related to the 5 Volt Sensor Reference 2 Circuit Low in my Jeep?

Repair options may include replacing the faulty sensor, repairing or replacing damaged wiring or connectors, resetting the ECM, or seeking professional diagnostic and repair services.

8. Can I reset the OBDII code P0652 in my Jeep myself?

You can attempt to clear the code using an OBDII scanner, but it is important to address the underlying issue causing the code to prevent it from reoccurring.

9. How much does it typically cost to repair OBDII code P0652 in a Jeep?

The cost of repair can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. Is OBDII code P0652 a common issue in Jeeps?

While it may not be as common as some other OBDII codes, P0652 related to the 5 Volt Sensor Reference 2 Circuit Low can occur in Jeeps due to sensor or circuitry issues.