AutoCodes – KIA – P0651 KIA

P0651 KIA Code - Sensor Reference Voltage 'B' Circuit Open

Quick Answer

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0651 KIA indicates Sensor Reference Voltage 'B' Circuit Open.
Common causes
Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 7,842
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 02, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0651 KIA Description

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Each reference bus provided 5-volt reference circuit for more than one sensor. Therefore, a fault condition on one 5-volt reference circuit will affect the other 5-volt reference circuits connected to the reference bus. The control module monitors the voltage on the 5-volt reference buses.
OBDII Code P0651 KIA - Sensor Reference Voltage 'B' Circuit Open - AutoCodes.com
P0651 KIA Code - Sensor Reference Voltage 'B' Circuit Open

What are the Possible Causes of the DTC P0651 KIA?

  • Faulty Engine Control Module (ECM)
  • ECM harness is open or shorted
  • ECM circuit poor electrical connection
  • Shorted sensor on 5 volt circuit

How to Fix the DTC P0651 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0651 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0651 KIA code?

Need more information on how to fix the P0651 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0651 KIA code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0651 KIA Code

1. What does the OBDII code P0651 mean for a Kia vehicle?

P0651 indicates an open circuit in the Sensor Reference Voltage 'B' circuit, meaning the ECU is not detecting the correct voltage from a sensor or group of sensors.

2. What are common symptoms of the P0651 code in a Kia?

Symptoms may include a check engine light, poor engine performance, reduced fuel efficiency, or issues with specific sensors like the throttle position sensor or MAP sensor.

3. What causes the P0651 code to appear on a Kia?

Common causes include damaged wiring, a faulty sensor, a defective powertrain control module (PCM), or poor electrical connections in the Sensor Reference Voltage 'B' circuit.

4. How do I diagnose the P0651 code on my Kia?

Start by inspecting the wiring and connectors associated with the Sensor Reference Voltage 'B' circuit. Use a multimeter to check for continuity and proper voltage. If no issues are found, test the sensors and PCM.

5. Can I drive my Kia with the P0651 code?

Driving with the P0651 code is not recommended, as it may cause performance issues or damage to other components if left unresolved.

6. How much does it cost to repair the P0651 code on a Kia?

Repair costs vary depending on the issue. Fixing wiring or connectors may cost $50-$150, while replacing a faulty sensor or PCM could cost $200-$800 or more.

7. Which sensors are commonly affected by the P0651 code?

Affected sensors may include the throttle position sensor (TPS), manifold absolute pressure (MAP) sensor, or other sensors relying on the Sensor Reference Voltage 'B' circuit.

8. What tools are needed to troubleshoot the P0651 code?

You'll need an OBDII scanner, a multimeter, and a wiring diagram for your Kia's Sensor Reference Voltage 'B' circuit.

9. Can a faulty PCM trigger the P0651 code on a Kia?

Yes, a defective PCM can cause the P0651 code if it fails to provide or monitor the reference voltage correctly.

10. What should I check first when troubleshooting the P0651 code?

Begin by inspecting the wiring and connectors in the Sensor Reference Voltage 'B' circuit for damage, corrosion, or loose connections.

Discuss the causes and fixes for P0651 KIA OBDII Code

Code P0651 KIA comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play