AutoCodesNissan – P0650 2002 Nissan Altima Sedan

P0650 2002 Nissan Altima Sedan Code - Malfunction Indicator Lamp Control Circuit Malfunction

Quick Answer

Malfunction Indicator Lamp (MIL) is located on the instrument panel. Common causes include Faulty Malfunction Indicator Lamp Bulb, Malfunction Indicator Lamp Bulb harness is open or shorted, Malfunction Indicator Lamp Bulb circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0650 2002 Nissan Altima Sedan indicates Malfunction Indicator Lamp Control Circuit Malfunction.
Common causes
Common causes include Faulty Malfunction Indicator Lamp Bulb, Malfunction Indicator Lamp Bulb harness is open or shorted, Malfunction Indicator Lamp Bulb circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,987
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0650 2002 Nissan Altima Sedan Description

Malfunction Indicator Lamp (MIL) is located on the instrument panel. When the ignition switch is turned ON without engine running, MIL will light up. This is a bulb check. When the engine is started, MIL should go off. If MIL remains on, the on board diagnostic system has detected an engine system malfunction.
OBDII Code P0650 2002 Nissan Altima Sedan - Malfunction Indicator Lamp Control Circuit Malfunction - AutoCodes.com
P0650 2002 Nissan Altima Sedan Code - Malfunction Indicator Lamp Control Circuit Malfunction

What are the Possible Causes of the DTC P0650 2002 Nissan Altima Sedan?

  • Faulty Malfunction Indicator Lamp Bulb
  • Malfunction Indicator Lamp Bulb harness is open or shorted
  • Malfunction Indicator Lamp Bulb circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0650 2002 Nissan Altima Sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0650 2002 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0650 2002 Nissan Altima Sedan code?

Need more information on how to fix the P0650 2002 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0650 2002 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0650 2002 Nissan Altima Sedan Code

1. What does the OBDII code P0650 mean on a 2002 Nissan Altima Sedan?

P0650 indicates a malfunction in the Malfunction Indicator Lamp (MIL) control circuit, which can prevent the check engine light from functioning properly.

2. What are the symptoms of code P0650 on a 2002 Nissan Altima?

Common symptoms include the check engine light not illuminating when the ignition is turned on or staying off even when there’s a fault.

3. What causes the P0650 code to appear on a 2002 Nissan Altima?

Possible causes include a faulty MIL bulb, damaged wiring or connectors in the MIL circuit, a bad ECM, or an open or short circuit.

4. Can a faulty ECM cause the P0650 code?

Yes, a defective Engine Control Module (ECM) can cause the P0650 code, but it’s less common than issues with the bulb or wiring.

5. How do I diagnose the P0650 code on my 2002 Nissan Altima?

Start by checking the MIL bulb for proper function, inspect the wiring and connectors for damage, and use a multimeter to test the circuit. If all else checks out, consider testing the ECM.

6. Is it safe to drive with a P0650 code on my 2002 Nissan Altima?

While the car may run fine, the check engine light might not work properly, which could leave you unaware of other serious issues. It’s best to address the problem promptly.

7. How do I fix the P0650 code on a 2002 Nissan Altima?

Repairs may involve replacing the MIL bulb, repairing damaged wiring or connectors, or, in rare cases, replacing the ECM.

8. How much does it cost to fix the P0650 code on a 2002 Nissan Altima?

The cost varies depending on the issue. Replacing a bulb or repairing wiring is typically inexpensive, while ECM replacement can cost several hundred dollars.

9. Can a blown fuse trigger the P0650 code?

Yes, a blown fuse related to the MIL circuit can cause this code. Check all relevant fuses as part of the diagnostic process.

10. Will clearing the P0650 code fix the problem on my 2002 Nissan Altima?

Clearing the code may temporarily reset the check engine light, but the underlying issue needs to be addressed to prevent the code from returning.

Discuss the causes and fixes for P0650 2002 Nissan Altima Sedan OBDII Code

Code P0650 2002 Nissan Altima Sedan comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play