AutoCodes – Ford – P0622 2008 Ford Fusion

P0622 2008 Ford Fusion Code - Generator Field Terminal Circuit

Quick Answer

The Engine Control Module (ECM) uses the generator turn on signal circuit to control the generator. Common causes include Battery charge, Faulty Generator, Generator harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0622 2008 Ford Fusion indicates Generator Field Terminal Circuit.
Common causes: Common causes include Battery charge, Faulty Generator, Generator harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,173

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 01, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0622 2008 Ford Fusion Description

The Engine Control Module (ECM) uses the generator turn on signal circuit to control the generator. A high side driver within the ECM allows the ECM to turn the generator ON and OFF. When Generator operation is desired, the ECM sends a 5 volt signal to the voltage regulator via the generator turn on signal circuit. This causes the voltage regulator to begin controlling the generator field circuit. Once the Generator is enabled by the ECM, the voltage regulator controls generator output independently of the ECM. Under certain operating conditions, the ECM can turn Off the generator by turning Off the 5 volt signal on the generator turn on signal circuit.

OBDII Code P0622 2008 Ford Fusion - Generator Field Terminal Circuit - AutoCodes.com — P0622 2008 Ford Fusion Code - Generator Field Terminal Circuit

What does this mean?

What are the Possible Causes of the DTC P0622 2008 Ford Fusion?

Battery charge
Faulty Generator
Generator harness is open or shorted
Generator circuit poor electrical connection
Engine Control Module (ECM) controlled generator
Faulty ECM

How to Fix the DTC P0622 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

If the battery is OK then the alternator is more than likely the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0622 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0622 2008 Ford Fusion code?

Need more information on how to fix the P0622 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0622 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0622 2008 Ford Fusion Code

1. What does the OBDII code P0622 mean on a 2008 Ford Fusion?

The P0622 code indicates a problem with the Generator Field Terminal Circuit, which involves the alternatorâ€™s ability to regulate voltage output.

2. What are the common symptoms of P0622 in a 2008 Ford Fusion?

Common symptoms include the battery warning light illuminating, difficulty starting the vehicle, dim or flickering lights, and a dead battery.

3. What causes the P0622 code in a 2008 Ford Fusion?

Causes include a faulty alternator, damaged wiring or connectors in the generator field circuit, a bad voltage regulator, or issues with the PCM (Powertrain Control Module).

4. Can I drive my 2008 Ford Fusion with the P0622 code?

Itâ€™s not recommended, as the code indicates charging system issues that could lead to a drained battery and cause the vehicle to stall while driving.

5. How do you diagnose the P0622 code?

Diagnosis involves checking the alternator, inspecting the wiring and connectors in the generator field circuit, and testing the voltage regulator and PCM for proper operation.

6. What repairs can fix the P0622 code on a 2008 Ford Fusion?

Repairs may include replacing the alternator, repairing or replacing damaged wiring or connectors, replacing the voltage regulator, or reprogramming or replacing the PCM.

7. How much does it cost to fix the P0622 code on a 2008 Ford Fusion?

Repair costs vary depending on the issue, but replacing an alternator typically costs $300-$700, while wiring repairs may cost less.

8. Can a low battery cause the P0622 code to appear?

Yes, a low or weak battery can trigger the P0622 code, as it affects the charging systemâ€™s performance.

9. Does the P0622 code always mean the alternator is bad?

No, the code could also result from wiring issues, a faulty voltage regulator, or problems with the PCM.

10. How can I prevent the P0622 code from recurring?

Regular maintenance of the charging system, inspecting wiring and connectors, and ensuring the alternator and battery are in good condition can help prevent the code.