P061B Buick Code - Control Module Torque Calculation Performance
Quick Answer
This diagnostic applies to internal microprocessor integrity conditions within the Hybrid Powertrain Control Module (HPCM). Common causes include Faulty Drive Motor Generator Power Inverter Module (PIM), Drive Motor Generator Power Inverter Module (PIM) harness is open or shorted, Drive Motor Generator Power Inverter Module (PIM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P061B Buick indicates Control Module Torque Calculation Performance.
- Common causes
- Common causes include Faulty Drive Motor Generator Power Inverter Module (PIM), Drive Motor Generator Power Inverter Module (PIM) harness is open or shorted, Drive Motor Generator Power Inverter Module (PIM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P061B Buick Description
What are the Possible Causes of the DTC P061B Buick?
- Faulty Drive Motor Generator Power Inverter Module (PIM)
- Drive Motor Generator Power Inverter Module (PIM) harness is open or shorted
- Drive Motor Generator Power Inverter Module (PIM) circuit poor electrical connection
How to Fix the DTC P061B Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P061B Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P061B Buick code?
Need more information on how to fix the P061B Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P061B Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P061B Buick Code
1. What does the OBDII code P061B mean for a Buick?
P061B indicates a "Control Module Torque Calculation Performance" issue, where the Engine Control Module (ECM) detects an error in the calculated torque signal.
2. What are the common symptoms of code P061B in a Buick?
Common symptoms include poor engine performance, reduced fuel efficiency, hesitation on acceleration, possible limp mode activation, and an illuminated Check Engine Light.
3. What causes the P061B code to appear on a Buick?
Causes include faulty ECM software, wiring or connector issues, sensor malfunctions (e.g., throttle or mass air flow sensors), or problems with torque calculation inputs.
4. Can I still drive my Buick with a P061B code?
While the vehicle may be drivable, it’s not recommended as it could lead to reduced performance, potential engine damage, or unsafe driving conditions.
5. How is the P061B code diagnosed in a Buick?
A technician will use a scan tool to read freeze frame data, inspect wiring and connectors, test sensors like the throttle position sensor, and check the ECM for proper operation.
6. What repairs can fix the P061B code on a Buick?
Repairs may include reprogramming or replacing the ECM, repairing or replacing damaged wiring, cleaning or replacing sensors, or updating vehicle software.
7. Can a dirty throttle body cause the P061B code on a Buick?
Yes, a dirty or malfunctioning throttle body can disrupt torque calculations and trigger the P061B code.
8. Will clearing the code fix the P061B issue on my Buick?
Clearing the code may temporarily turn off the light, but the underlying issue must be addressed to prevent recurrence.
9. Is the P061B code common on all Buick models?
The P061B code can occur across multiple Buick models, but its frequency depends on the model, year, and maintenance history.
10. How much does it cost to fix a P061B code on a Buick?
Repair costs vary depending on the root cause but can range from $150 for minor sensor repairs to over $1,000 for ECM replacement.
Discuss the causes and fixes for P061B Buick OBDII Code
Code P061B Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
