AutoCodes – GMC – P0616 2017 GMC Sierra

P0616 2017 GMC Sierra Code - Starter Relay Control Circuit Low Voltage

Quick Answer

When the ignition switch is placed in the START position, a discrete signal is supplied to the Body Control Module (BCM) notifying it that the ignition is in the START position. Common causes include Faulty Starter Relay, Starter Relay harness is open or shorted, Starter Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0616 2017 GMC Sierra indicates Starter Relay Control Circuit Low Voltage.
Common causes: Common causes include Faulty Starter Relay, Starter Relay harness is open or shorted, Starter Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 207

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 15, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0616 2017 GMC Sierra Description

When the ignition switch is placed in the START position, a discrete signal is supplied to the Body Control Module (BCM) notifying it that the ignition is in the START position. The BCM then sends a message to the Engine Control Module (ECM) that a crank has been requested. The ECM then verifies that the clutch pedal is depressed, or the transmission is in Park/Neutral. If it is, the ECM then supplies 12 V to the control circuit of the starter relay. When this occurs, battery voltage is supplied through the switch of the starter relay to the starter solenoid. The Diagnostic Trouble Code (DTC) will be set when the ECM detects improper voltage on the control circuit of the starter relay.

OBDII Code P0616 2017 GMC Sierra - Starter Relay Control Circuit Low Voltage - AutoCodes.com — P0616 2017 GMC Sierra Code - Starter Relay Control Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P0616 2017 GMC Sierra?

Faulty Starter Relay
Starter Relay harness is open or shorted
Starter Relay circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0616 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0616 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0616 2017 GMC Sierra code?

Need more information on how to fix the P0616 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0616 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.