AutoCodes – Honda – P0615 2019 Honda CR-V

P0615 2019 Honda CR-V Code - Starter Cut Relay Diagnosis Circuit Malfunction

Quick Answer

The starter control system prevents the starter from accidentally activating when the shift position is not in the P or N position/mode, or when the engine is running. Common causes include Faulty Starter Cut Relay (Built into the Relay Circuit Board), Starter Cut Relay harness is open or shorted, Starter Cut Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0615 2019 Honda CR-V indicates Starter Cut Relay Diagnosis Circuit Malfunction.
Common causes: Common causes include Faulty Starter Cut Relay (Built into the Relay Circuit Board), Starter Cut Relay harness is open or shorted, Starter Cut Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 148

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 03, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0615 2019 Honda CR-V Description

The starter control system prevents the starter from accidentally activating when the shift position is not in the P or N position/mode, or when the engine is running. If the vehicle is turned mistakenly while the shift position is not in P or N or while the engine is running, the Powertrain Control Module (PCM) will stop power to the starter cut relays. However, cranking to return from an auto idle stop does not correspond to this. In this system, two starter cut relays are connected in series (starter cut relay 1, starter cut relay 2) to prevent the starter from running continuously due to a starter cut relay malfunction. Also, a diagnosis line (START DIAG) is connected to monitor the voltage between the starter cut relay 1 and starter cut relay 2. Based on the diagnosis line signals, the PCM detects an OPEN malfunction of the diagnosis line, an ON malfunction of starter cut relay 1, and an ON malfunction of starter cut relay 2. The PCM also equipped with return signal circuits of starter cut relay 1 and starter cut relay 2 to detect an OFF malfunction. If the voltage of the diagnosis line (START DIAG) input does not exceed the upper and lower limits for a specified duration when the starter is ON (STS ON), the PCM detects an OPEN malfunction of the diagnosis line and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0615 2019 Honda CR-V - Starter Cut Relay Diagnosis Circuit Malfunction - AutoCodes.com — P0615 2019 Honda CR-V Code - Starter Cut Relay Diagnosis Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC P0615 2019 Honda CR-V?

Faulty Starter Cut Relay (Built into the Relay Circuit Board)
Starter Cut Relay harness is open or shorted
Starter Cut Relay circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0615 2019 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0615 2019 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0615 2019 Honda CR-V code?

Need more information on how to fix the P0615 2019 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0615 2019 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0615 2019 Honda CR-V Code

1. What are the common symptoms of OBDII code P0615 in a 2019 Honda CR-V?

The common symptoms of OBDII code P0615 in a 2019 Honda CR-V include difficulty starting the engine, engine stalling, or the engine not starting at all.

2. What does OBDII code P0615 indicate in a 2019 Honda CR-V?

OBDII code P0615 in a 2019 Honda CR-V indicates a Starter Cut Relay Diagnosis Circuit Malfunction, which means there is an issue with the circuit that controls the starter cut relay.

3. What are the possible causes of OBDII code P0615 in a 2019 Honda CR-V?

Possible causes of OBDII code P0615 in a 2019 Honda CR-V include a faulty starter cut relay, damaged wiring or connectors in the circuit, or a malfunctioning engine control module (ECM).

4. How can I diagnose OBDII code P0615 in a 2019 Honda CR-V?

To diagnose OBDII code P0615 in a 2019 Honda CR-V, you can start by checking the condition of the starter cut relay, inspecting the wiring and connectors in the circuit, and testing the ECM for any faults.

5. Can I still drive my 2019 Honda CR-V with OBDII code P0615?

It is not recommended to drive your 2019 Honda CR-V with OBDII code P0615, as it can lead to potential starting or stalling issues. It is best to address the problem promptly to avoid further damage.

6. How do I repair OBDII code P0615 in a 2019 Honda CR-V?

To repair OBDII code P0615 in a 2019 Honda CR-V, you may need to replace the faulty starter cut relay, repair any damaged wiring or connectors, or reprogram the ECM if necessary.

7. Can a DIY enthusiast fix OBDII code P0615 in a 2019 Honda CR-V?

Depending on your level of expertise, a DIY enthusiast may be able to fix OBDII code P0615 in a 2019 Honda CR-V by following the repair steps outlined in the service manual. However, complex electrical issues may require professional assistance.

8. How much does it cost to repair OBDII code P0615 in a 2019 Honda CR-V?

The cost to repair OBDII code P0615 in a 2019 Honda CR-V can vary depending on the specific cause of the issue, the parts needed for repair, and labor costs. It is advisable to obtain quotes from different repair shops for an accurate estimate.

9. Will resetting the OBDII code P0615 in a 2019 Honda CR-V make it go away permanently?

Resetting the OBDII code P0615 in a 2019 Honda CR-V may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear. It is essential to diagnose and repair the root cause of the problem to prevent future occurrences.

10. How urgent is it to address OBDII code P0615 in a 2019 Honda CR-V?

It is advisable to address OBDII code P0615 in a 2019 Honda CR-V promptly to prevent potential starting or stalling issues. Ignoring the code can lead to further damage or inconvenience while driving.