P0613 Jeep Code - Transaxle Control Module System Fault
Quick Answer
The Transaxle Control Module (TCM) consists of a microcomputer and connectors for signal input and output and for power supply. Common causes include Faulty Transaxle Control Module (TCM), Transaxle Control Module harness is open or shorted, Transaxle Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0613 Jeep indicates Transaxle Control Module System Fault.
- Common causes
- Common causes include Faulty Transaxle Control Module (TCM), Transaxle Control Module harness is open or shorted, Transaxle Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0613 Jeep Description
What are the Possible Causes of the DTC P0613 Jeep?
- Faulty Transaxle Control Module (TCM)
- Transaxle Control Module harness is open or shorted
- Transaxle Control Module circuit poor electrical connection
How to Fix the DTC P0613 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0613 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0613 Jeep code?
Need more information on how to fix the P0613 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0613 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0613 Jeep Code
What does the OBDII code P0613 indicate in a Jeep?
The P0613 code indicates a fault in the Transaxle Control Module (TCM) system, which can lead to issues with transmission performance and shifting.
What are the common symptoms associated with the P0613 code?
Common symptoms include erratic shifting, transmission slippage, the check engine light being illuminated, and in some cases, the vehicle may enter limp mode.
What could cause the P0613 code to trigger?
Causes can include a faulty Transaxle Control Module, wiring issues or poor connections in the TCM circuit, or problems with the transmission itself.
How can I diagnose the P0613 code?
To diagnose the P0613 code, start by scanning the vehicle for codes, inspecting the wiring and connectors related to the TCM, and checking for any other related codes that may provide more context.
What are some common repair tips for the P0613 code?
Common repair tips include checking and repairing any damaged wiring or connectors, resetting the TCM, and if necessary, replacing the TCM itself if it is determined to be faulty.
Can I drive my Jeep with the P0613 code?
It is not recommended to drive the vehicle with the P0613 code, as it may cause transmission issues and could lead to further damage or unsafe driving conditions.
How much does it typically cost to repair the P0613 code?
Repair costs can vary widely based on the specific issue, but addressing wiring problems may cost less than replacing the TCM, which can be more expensive, often ranging from $200 to $1,000 or more depending on labor and parts.
Is it possible for the P0613 code to clear itself?
While it is possible for the code to clear itself if the issue was temporary, it is recommended to diagnose and repair the underlying problem to prevent recurrence.
What should I do if I clear the P0613 code but it comes back?
If the code returns after being cleared, further diagnosis is necessary to identify and fix the root cause, which may involve checking the TCM, wiring, or related components for faults.
Are there any specific tools needed to troubleshoot the P0613 code?
Yes, a good quality OBDII scanner is necessary to read codes, and a multimeter may be needed to test electrical connections and wiring associated with the TCM.
Discuss the causes and fixes for P0613 Jeep OBDII Code
Code P0613 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
