AutoCodesToyota – P060E 2018 Toyota RAV4

P060E 2018 Toyota RAV4 Code - Internal Control Module Throttle Position Performance

Quick Answer

The Engine Control Module (ECM) monitors the signals received from the throttle position sensor No. Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P060E 2018 Toyota RAV4 indicates Internal Control Module Throttle Position Performance.
Common causes
Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 365
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 29, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P060E 2018 Toyota RAV4 Description

The Engine Control Module (ECM) monitors the signals received from the throttle position sensor No. 1 and stop light switch assembly. As the ECM monitors the STP signal of the stop light switch assembly and the throttle position sensor No. 1, if these signals do not correlate, the Diagnostic Trouble Code (DTC) is stored.
OBDII Code P060E 2018 Toyota RAV4 - Internal Control Module Throttle Position Performance - AutoCodes.com
P060E 2018 Toyota RAV4 Code - Internal Control Module Throttle Position Performance

What are the Possible Causes of the DTC P060E 2018 Toyota RAV4?

  • Faulty Engine Control Module (ECM)
  • Engine Control Module harness is open or shorted
  • Engine Control Module circuit poor electrical connection

How to Fix the DTC P060E 2018 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P060E 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P060E 2018 Toyota RAV4 code?

Need more information on how to fix the P060E 2018 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P060E 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P060E 2018 Toyota RAV4 Code

What does OBDII code P060E mean on a 2018 Toyota RAV4?

P060E indicates an issue with the Internal Control Module Throttle Position Performance, meaning the ECM has detected a problem with the throttle position sensor or its signal.

What are the common symptoms of code P060E on a Toyota RAV4?

Symptoms may include poor acceleration, engine hesitation, reduced fuel efficiency, difficulty starting the vehicle, and the check engine light turning on.

What causes the P060E code to appear in a 2018 Toyota RAV4?

Common causes include a faulty throttle position sensor, wiring issues, software glitches in the ECM, or a malfunctioning ECM.

Can I drive my Toyota RAV4 with the P060E code active?

While the vehicle may still be operable, driving with this code can lead to performance issues and further damage. It’s best to address the issue promptly.

How can I diagnose the P060E code on a Toyota RAV4?

Start by using an OBDII scanner to confirm the code. Then check the throttle position sensor, wiring, and connections for damage or faults. Perform ECM testing if necessary.

What repairs can fix the P060E code on a 2018 Toyota RAV4?

Repairs may include replacing the throttle position sensor, repairing or replacing damaged wiring, updating ECM software, or replacing the ECM if it’s faulty.

How much does it cost to fix the P060E code on a Toyota RAV4?

Repair costs can vary from $100 to $1,000 depending on whether you need sensor replacement, wiring repair, or ECM replacement.

Can a software update fix the P060E code on a Toyota RAV4?

Yes, if the issue is caused by outdated or corrupted ECM software, a software update may resolve the problem.

How can I prevent the P060E code from recurring?

Regular maintenance, including inspecting sensors and wiring for wear, and addressing any performance issues early, can help prevent this code from recurring.

Is the P060E code related to other throttle-related issues?

Yes, it can be linked to other throttle control system issues, and diagnosing related codes may be necessary to fully resolve the problem.

Discuss the causes and fixes for P060E 2018 Toyota RAV4 OBDII Code

Code P060E 2018 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play