AutoCodes – Generic – P060E

P060E Code - Internal Control Module Throttle Position Performance

Quick Answer

The Throttle Actuator Control (TAC) system uses two Accelerator Pedal Position (APP) sensors to monitor the pedal position. Common causes include Faulty Throttle Actuator, Throttle Actuator harness is open or shorted, Throttle Actuator poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P060E indicates Internal Control Module Throttle Position Performance.
Common causes
Common causes include Faulty Throttle Actuator, Throttle Actuator harness is open or shorted, Throttle Actuator poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 29,403
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 01, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P060E Description

The Throttle Actuator Control (TAC) system uses two Accelerator Pedal Position (APP) sensors to monitor the pedal position. Two processors are also used to monitor the TAC system data. The Engine Control Module (ECM) performs an intrusive test in order to detect that the APP signals are not shorted together. The ECM accomplishes this by pulling the APP sensor 2 low momentarily and looking for sensor 1 to also be low. The TAC system also performs this test on the throttle position (TP) sensors. This diagnostic monitors the transistor used to pull one pedal and one throttle sensor to ground simultaneously. Additionally, Both processors monitor each other's data to verify that the indicated APP calculation is correct.
OBDII Code P060E - Internal Control Module Throttle Position Performance - AutoCodes.com
P060E Code - Internal Control Module Throttle Position Performance

What are the Possible Causes of the DTC P060E?

  • Faulty Throttle Actuator
  • Throttle Actuator harness is open or shorted
  • Throttle Actuator poor electrical connection

How to Fix the DTC P060E?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P060E code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P060E code?

Need more information on how to fix the P060E code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P060E code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

  • P060E Buick β€” Internal Control Module Throttle Position Performance
  • P060E Cadillac β€” Internal Control Module Throttle Position Performance
  • P060E Chevrolet β€” Internal Control Module Throttle Position Performance
  • P060E GMC β€” Internal Control Module Throttle Position Performance
  • P060E Lexus β€” Internal Control Module Throttle Position Performance
  • P060E Pontiac β€” Internal Control Module Throttle Position Performance
  • P060E Saab β€” Control Module Throttle Position System Performance
  • P060E Saturn β€” Internal Control Module Throttle Position Performance
  • P060E Scion β€” Internal Control Module Throttle Position Performance
  • P060E Toyota β€” Internal Control Module Throttle Position Performance
About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P060E Code

1. What are the common symptoms of OBDII code P060E - Internal Control Module Throttle Position Performance?

- Common symptoms include rough idling, stalling, decreased engine performance, and the illumination of the Check Engine Light.

2. What are the possible causes of OBDII code P060E?

- The code P060E can be triggered by issues such as a faulty throttle position sensor, wiring problems, a malfunctioning electronic throttle control system, or a defective engine control module.

3. How can I diagnose the OBDII code P060E?

- To diagnose the code P060E, a mechanic would typically use an OBDII scanner to retrieve the code and then perform further testing of the throttle position sensor, wiring connections, and the electronic throttle control system.

4. Can I continue driving my vehicle with the OBDII code P060E present?

- It is not recommended to continue driving your vehicle with the code P060E present, as it can lead to further damage to the engine and other components. It is best to address the issue promptly.

5. How can I repair OBDII code P060E?

- Repairing the code P060E may involve replacing the throttle position sensor, repairing any damaged wiring, addressing issues with the electronic throttle control system, or replacing the engine control module if necessary.

6. Are there any DIY tips for fixing OBDII code P060E?

- DIY tips for fixing the code P060E include checking for loose or damaged wiring connections, cleaning the throttle body, and ensuring the throttle position sensor is properly calibrated.

7. Can a bad throttle position sensor cause OBDII code P060E?

- Yes, a malfunctioning throttle position sensor is one of the common causes of OBDII code P060E, as it can affect the performance of the throttle control system and trigger the code.

8. How long does it typically take to repair OBDII code P060E?

- The repair time for the code P060E can vary depending on the exact cause of the issue and the extent of the repairs needed. It can take anywhere from a few hours to a day or more.

9. Will resetting the Check Engine Light make OBDII code P060E go away?

- Resetting the Check Engine Light may temporarily turn off the light, but it will not fix the underlying issue causing the code P060E. It is important to diagnose and repair the problem to prevent it from reoccurring.

10. Is it necessary to visit a mechanic for OBDII code P060E, or can I fix it myself?

- While some DIY repairs may be possible for OBDII code P060E, it is recommended to have a qualified mechanic diagnose and repair the issue to ensure it is properly addressed and to prevent further damage to the vehicle.

Discuss the causes and fixes for P060E OBDII Code

Code P060E comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play