AutoCodes – Pontiac – P060D Pontiac

P060D Pontiac Code - Internal Control Module Accelerator Pedal Position Performance

Quick Answer

The Throttle Actuator Control (TAC) system uses two Accelerator Pedal Position (APP) sensors to monitor the pedal position. Common causes include Faulty Accelerator Pedal Position (APP) Sensor (s), Accelerator Pedal Position (APP) Sensor (s) harness is open or shorted, Accelerator Pedal Position (APP) Sensor (s) poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P060D Pontiac indicates Internal Control Module Accelerator Pedal Position Performance.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor (s), Accelerator Pedal Position (APP) Sensor (s) harness is open or shorted, Accelerator Pedal Position (APP) Sensor (s) poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,040

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 01, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P060D Pontiac Description

The Throttle Actuator Control (TAC) system uses two Accelerator Pedal Position (APP) sensors to monitor the pedal position. Two processors are also used to monitor the TAC system data. The Engine Control Module (ECM) performs an intrusive test in order to detect that the APP signals are not shorted together. The ECM accomplishes this by pulling the APP sensor 2 low momentarily and looking for sensor 1 to also be low. The TAC system also performs this test on the throttle position (TP) sensors. This diagnostic monitors the transistor used to pull one pedal and one throttle sensor to ground simultaneously. Additionally, Both processors monitor each other's data to verify that the indicated APP calculation is correct.

OBDII Code P060D Pontiac - Internal Control Module Accelerator Pedal Position Performance - AutoCodes.com — P060D Pontiac Code - Internal Control Module Accelerator Pedal Position Performance

What does this mean?

What are the Possible Causes of the DTC P060D Pontiac?

Faulty Accelerator Pedal Position (APP) Sensor (s)
Accelerator Pedal Position (APP) Sensor (s) harness is open or shorted
Accelerator Pedal Position (APP) Sensor (s) poor electrical connection

How to Fix the DTC P060D Pontiac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P060D Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P060D Pontiac code?

Need more information on how to fix the P060D Pontiac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P060D Pontiac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P060D Pontiac Code

What does the OBDII code P060D mean for a Pontiac?

P060D indicates an issue with the internal control module detecting a performance problem with the accelerator pedal position sensor.

What are common symptoms of code P060D in a Pontiac?

Symptoms include reduced engine power, difficulty accelerating, poor fuel efficiency, and possibly the illumination of the check engine light.

What causes code P060D on a Pontiac vehicle?

Common causes include a malfunctioning accelerator pedal position sensor, wiring issues, a faulty control module, or software glitches.

Can I drive my Pontiac with the P060D code?

Driving with code P060D is not recommended as it can lead to performance issues, reduced power, and unsafe driving conditions.

How is code P060D diagnosed on a Pontiac?

A mechanic will use an OBDII scanner to confirm the code, inspect the accelerator pedal position sensor, check the wiring and connections, and possibly test the control module.

What is the most common fix for code P060D on a Pontiac?

The most common fix is replacing the faulty accelerator pedal position sensor, but repairs can also include addressing wiring issues or reprogramming the control module.

How much does it cost to fix code P060D on a Pontiac?

Repair costs vary, but replacing the accelerator pedal position sensor typically costs $100-$300, while control module repairs may be more expensive.

Can a software update resolve code P060D on a Pontiac?

Yes, in some cases, a software update or reprogramming of the control module can resolve this issue if it stems from a glitch.

What tools are needed to diagnose code P060D in a Pontiac?

Diagnosing P060D requires an OBDII scanner, a multimeter for testing wiring, and potentially manufacturer-specific tools for control module testing.

Is code P060D a common problem for Pontiac vehicles?

While not extremely common, P060D can occur in Pontiac vehicles, especially as components like the accelerator pedal position sensor age or if wiring issues arise.