AutoCodes – Toyota – P060D 2018 Toyota RAV4

P060D 2018 Toyota RAV4 Code - Internal Control Module Accelerator Pedal Position Performance

Quick Answer

The Engine Control Module (ECM) monitors the input signals of the accelerator pedal position sensor No. Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P060D 2018 Toyota RAV4 indicates Internal Control Module Accelerator Pedal Position Performance.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 216

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 29, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P060D 2018 Toyota RAV4 Description

The Engine Control Module (ECM) monitors the input signals of the accelerator pedal position sensor No. 1. When the input signals and control signals deviate, the Diagnostic Trouble Code (DTC) is stored.

OBDII Code P060D 2018 Toyota RAV4 - Internal Control Module Accelerator Pedal Position Performance - AutoCodes.com — P060D 2018 Toyota RAV4 Code - Internal Control Module Accelerator Pedal Position Performance

What does this mean?

What are the Possible Causes of the DTC P060D 2018 Toyota RAV4?

Faulty Engine Control Module (ECM)
Engine Control Module harness is open or shorted
Engine Control Module circuit poor electrical connection

How to Fix the DTC P060D 2018 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P060D 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P060D 2018 Toyota RAV4 code?

Need more information on how to fix the P060D 2018 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P060D 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P060D 2018 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P060D in a 2018 Toyota RAV4?

- Common symptoms include reduced engine performance, rough idling, and an illuminated check engine light.

2. What could be the potential causes of OBDII code P060D in a 2018 Toyota RAV4?

- Possible causes may include a faulty accelerator pedal position sensor, issues with the internal control module, or wiring/connectivity problems.

3. How can I diagnose OBDII code P060D in my 2018 Toyota RAV4?

- Diagnosis typically involves using an OBDII scanner to read the code, checking the accelerator pedal position sensor, inspecting wiring connections, and testing the internal control module.

4. Can I continue driving my 2018 Toyota RAV4 with OBDII code P060D present?

- It is not recommended to drive the vehicle with this code active, as it can lead to performance issues and potential safety hazards.

5. What are some repair tips for addressing OBDII code P060D in a 2018 Toyota RAV4?

- Repair tips may include replacing the accelerator pedal position sensor, repairing or replacing any damaged wiring, and resetting the internal control module.

6. Is it necessary to visit a mechanic for OBDII code P060D in a 2018 Toyota RAV4?

- While some DIY troubleshooting may be possible, it is advisable to seek professional assistance to accurately diagnose and repair the underlying issue causing the code.

7. How much does it typically cost to fix OBDII code P060D in a 2018 Toyota RAV4?

- The cost of fixing this code can vary depending on the specific cause and required repairs, but it may range from a few hundred to over a thousand dollars.

8. Can resetting the check engine light resolve OBDII code P060D in a 2018 Toyota RAV4?

- Resetting the check engine light may temporarily turn it off, but it will not fix the underlying issue causing the code. It is important to address the root cause for a permanent solution.

9. Are there any recalls or technical service bulletins related to OBDII code P060D in a 2018 Toyota RAV4?

- It is advisable to check with Toyota dealership or the National Highway Traffic Safety Administration (NHTSA) website for any related recalls or technical service bulletins.

10. How can I prevent OBDII code P060D from recurring in my 2018 Toyota RAV4?

- Regular maintenance and inspections, prompt address of any warning lights, and addressing any performance issues promptly can help prevent the recurrence of this code.