AutoCodes – Mercury – P060C Mercury

P060C Mercury Code - Internal Control Module Main Processor Performance

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Engine Control Module (ECM) Programming, Faulty Engine Control Module, Faulty Engine Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P060C Mercury indicates Internal Control Module Main Processor Performance.
Common causes: Common causes include Engine Control Module (ECM) Programming, Faulty Engine Control Module, Faulty Engine Control Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,099

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 29, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P060C Mercury Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This self−check ensures that the ECM is functioning properly. This diagnostic also addresses the issue of the device not being programmed. The device monitors its ability to read and write to the memory. It also monitors a timing function. No external circuits are involved. If any malfunction is detected, the ECM will set the code and illuminate the engine light.

OBDII Code P060C Mercury - Internal Control Module Main Processor Performance - AutoCodes.com — P060C Mercury Code - Internal Control Module Main Processor Performance

What does this mean?

What are the Possible Causes of the DTC P060C Mercury?

Engine Control Module (ECM) Programming
Faulty Engine Control Module
Faulty Engine Control Module harness is open or shorted
Faulty Engine Control Module circuit poor electrical connection

How to Fix the DTC P060C Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Indicates an error occurred in the Powertrain Control Module (PCM).

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P060C Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P060C Mercury code?

Need more information on how to fix the P060C Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P060C Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P060C Mercury Code

1. What are the common symptoms of OBDII code P060C in a Mercury vehicle?

- Common symptoms include engine stalling, rough idling, loss of power, and poor acceleration.

2. What can cause the OBDII code P060C to trigger in a Mercury vehicle?

- The code P060C typically indicates an issue with the internal control module main processor performance, which can be caused by a faulty ECM, wiring issues, or software glitches.

3. How serious is the OBDII code P060C in a Mercury vehicle?

- The code P060C can affect the overall performance and drivability of the vehicle, so it is essential to address the issue promptly to prevent further damage.

4. How can I diagnose the OBDII code P060C in my Mercury vehicle?

- Diagnosing the code P060C usually involves using a diagnostic scanner to retrieve the trouble codes and then conducting further testing to pinpoint the exact cause of the issue.

5. Can I continue driving my Mercury with the OBDII code P060C present?

- It is not recommended to drive the vehicle with the code P060C present, as it can lead to further damage and potential safety hazards.

6. What are some repair tips for fixing the OBDII code P060C in a Mercury vehicle?

- Repair tips may include checking and repairing any damaged or corroded wiring, updating the ECM software, or replacing the ECM if necessary.

7. How much does it cost to repair the OBDII code P060C in a Mercury vehicle?

- The cost of repairing the code P060C can vary depending on the exact cause of the issue and the labor rates of the repair shop. It is advisable to get a diagnosis and estimate from a certified mechanic.

8. Can I reset the OBDII code P060C in my Mercury vehicle on my own?

- While you can reset the trouble codes using a diagnostic scanner, it is essential to address the underlying issue causing the code P060C to prevent it from reoccurring.

9. Will the OBDII code P060C cause my Mercury vehicle to fail an emissions test?

- Yes, the code P060C can cause your Mercury vehicle to fail an emissions test, as it indicates a problem with the internal control module main processor performance.

10. How long does it take to repair the OBDII code P060C in a Mercury vehicle?

- The repair time for the code P060C can vary depending on the exact cause of the issue and the availability of parts. It is best to consult with a mechanic for an accurate estimate of the repair time.