AutoCodes – Jeep – P060C Jeep

P060C Jeep Code - Internal Control Module Main Processor Performance

Quick Answer

The Powertrain Control Module (PCM) receives a constant voltage from the Batteries through the Battery wires that are connected directly to the positive (+) Battery post. Common causes include Low Battery Voltage, Battery harness is open or shorted, Battery circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P060C Jeep indicates Internal Control Module Main Processor Performance.
Common causes: Common causes include Low Battery Voltage, Battery harness is open or shorted, Battery circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 222

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 29, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P060C Jeep Description

The Powertrain Control Module (PCM) receives a constant voltage from the Batteries through the Battery wires that are connected directly to the positive (+) Battery post. The PCM receives Ignition Switch input when the vehicle is turned on. During this time the customer may experience some performance effects such as engine dying or hard starting. Fault Information and Trip Information may be inaccurate. The Diagnostic Trouble Code (DTC) will be set when the PCM detects Battery voltage lower than a calibrated threshold for a pre-determined amount of time. Battery voltage was removed from the PCM while it was powered on. This could be during engine operation, or after the key off while the PCM was powering down. The power down phase can last up to 10 minutes.

OBDII Code P060C Jeep - Internal Control Module Main Processor Performance - AutoCodes.com — P060C Jeep Code - Internal Control Module Main Processor Performance

What does this mean?

What are the Possible Causes of the DTC P060C Jeep?

Low Battery Voltage
Battery harness is open or shorted
Battery circuit poor electrical connection
Faulty Battery
Engine Control Module (ECM) Programming
Faulty Engine Control Module

How to Fix the DTC P060C Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P060C Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P060C Jeep code?

Need more information on how to fix the P060C Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P060C Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.