AutoCodes – GMC – P060C GMC

P060C GMC Code - Internal Control Module Main Processor Performance

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Engine Control Module (ECM) Programming, Faulty Engine Control Module, Faulty Engine Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P060C GMC indicates Internal Control Module Main Processor Performance.
Common causes: Common causes include Engine Control Module (ECM) Programming, Faulty Engine Control Module, Faulty Engine Control Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,479

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 29, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P060C GMC Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This self−check ensures that the ECM is functioning properly. This diagnostic also addresses the issue of the device not being programmed. The device monitors its ability to read and write to the memory. It also monitors a timing function. No external circuits are involved. If any malfunction is detected, the ECM will set the code and illuminate the engine light.

OBDII Code P060C GMC - Internal Control Module Main Processor Performance - AutoCodes.com — P060C GMC Code - Internal Control Module Main Processor Performance

What does this mean?

What are the Possible Causes of the DTC P060C GMC?

Engine Control Module (ECM) Programming
Faulty Engine Control Module
Faulty Engine Control Module harness is open or shorted
Faulty Engine Control Module circuit poor electrical connection

How to Fix the DTC P060C GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P060C GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P060C GMC code?

Need more information on how to fix the P060C GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P060C GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P060C GMC Code

1. What are the common symptoms of OBDII code P060C GMC?

- Common symptoms include engine stalling, rough idling, reduced fuel efficiency, and the illumination of the Check Engine Light.

2. What are the possible causes of OBDII code P060C GMC?

- The code may be triggered by a faulty internal control module, a software issue, a damaged wiring harness, or a weak battery.

3. How can I diagnose OBDII code P060C GMC?

- Diagnosis typically involves using an OBDII scanner to retrieve the code, checking for any other related codes, and inspecting the internal control module and its connections.

4. Can I still drive my vehicle with OBDII code P060C GMC?

- It is not recommended to drive your vehicle with this code as it can lead to further damage and potential safety risks. It's best to address the issue promptly.

5. How can I repair OBDII code P060C GMC?

- Repair options may include reprogramming the internal control module, replacing the internal control module, repairing damaged wiring, or addressing any underlying software issues.

6. Is it possible to reset OBDII code P060C GMC without repairs?

- While clearing the code may temporarily turn off the Check Engine Light, the underlying issue causing the code will likely persist and may trigger the code again in the future.

7. Can a weak battery cause OBDII code P060C GMC?

- Yes, a weak or failing battery can sometimes trigger this code due to insufficient power supply affecting the internal control module's performance.

8. How much does it cost to fix OBDII code P060C GMC?

- The cost of repair can vary depending on the cause of the issue, the needed parts, and labor costs. It's recommended to consult with a professional for an accurate estimate.

9. Will OBDII code P060C GMC affect my vehicle's performance?

- Yes, this code can impact your vehicle's performance by causing drivability issues, reduced power, and other related problems that may affect overall driving experience.

10. How long can I safely ignore OBDII code P060C GMC?

- Ignoring this code for an extended period can potentially lead to more severe issues and costly repairs. It's advisable to address the problem as soon as possible.