AutoCodes – Ford – P060C Ford

P060C Ford Code - Internal Control Module Main Processor Performance

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Engine Control Module (ECM) Programming, Faulty Engine Control Module, Faulty Engine Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P060C Ford indicates Internal Control Module Main Processor Performance.
Common causes: Common causes include Engine Control Module (ECM) Programming, Faulty Engine Control Module, Faulty Engine Control Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 21,370

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 29, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P060C Ford Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This self−check ensures that the ECM is functioning properly. This diagnostic also addresses the issue of the device not being programmed. The device monitors its ability to read and write to the memory. It also monitors a timing function. No external circuits are involved. If any malfunction is detected, the ECM will set the code and illuminate the engine light.

OBDII Code P060C Ford - Internal Control Module Main Processor Performance - AutoCodes.com — P060C Ford Code - Internal Control Module Main Processor Performance

What does this mean?

What are the Possible Causes of the DTC P060C Ford?

Engine Control Module (ECM) Programming
Faulty Engine Control Module
Faulty Engine Control Module harness is open or shorted
Faulty Engine Control Module circuit poor electrical connection

How to Fix the DTC P060C Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Indicates an error occurred in the Powertrain Control Module (PCM).

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P060C Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P060C Ford code?

Need more information on how to fix the P060C Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P060C Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P060C Ford Code

1. What does the OBDII code P060C mean on a Ford vehicle?

P060C indicates a performance issue with the internal control module's main processor, meaning the engine control module (ECM) is not functioning as expected.

2. What are the common symptoms of P060C on a Ford?

Symptoms may include a check engine light, poor engine performance, stalling, difficulty starting, and erratic transmission behavior.

3. What causes the P060C code to appear on a Ford?

Common causes include a faulty ECM, software corruption, wiring or connectivity issues, or electrical interference from other components.

4. Can a low battery cause the P060C code on a Ford?

Yes, a low or failing battery can cause voltage irregularities that may trigger the P060C code.

5. How is the P060C code diagnosed on a Ford?

Diagnosis typically involves scanning for codes, inspecting wiring and connections, checking battery voltage, and testing the ECM for functionality.

6. Can I drive my Ford with the P060C code active?

Driving with this code is not recommended as it can lead to poor performance, stalling, or further damage to the ECM.

7. How do you fix the P060C code on a Ford vehicle?

Repairs may include updating ECM software, repairing or replacing damaged wiring, or replacing the ECM if it is determined to be faulty.

8. How much does it cost to repair the P060C code on a Ford?

Repair costs vary, but replacing an ECM can range from $500 to $1,500, while smaller fixes like wiring repairs may cost significantly less.

9. Can a software update clear the P060C code on a Ford?

Yes, if the issue is related to outdated or corrupted software, an ECM software update may resolve the problem.

10. Does the P060C code require ECM replacement on a Ford?

Not always. The ECM should only be replaced after confirming that the issue is not caused by wiring, software, or other external factors.

Discuss the causes and fixes for P060C Ford OBDII Code

Submit a New Comment

Code P060C Ford comments

No comments found for this page.

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.