AutoCodes – Dodge – P060C Dodge

P060C Dodge Code - Internal Control Module Main Processor Performance

Quick Answer

The Powertrain Control Module (PCM) receives a constant voltage from the Batteries through the Battery wires that are connected directly to the positive (+) Battery post. Common causes include Low Battery Voltage, Battery harness is open or shorted, Battery circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P060C Dodge indicates Internal Control Module Main Processor Performance.
Common causes
Common causes include Low Battery Voltage, Battery harness is open or shorted, Battery circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 184
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 29, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P060C Dodge Description

The Powertrain Control Module (PCM) receives a constant voltage from the Batteries through the Battery wires that are connected directly to the positive (+) Battery post. The PCM receives Ignition Switch input when the vehicle is turned on. During this time the customer may experience some performance effects such as engine dying or hard starting. Fault Information and Trip Information may be inaccurate. The Diagnostic Trouble Code (DTC) will be set when the PCM detects Battery voltage lower than a calibrated threshold for a pre-determined amount of time. Battery voltage was removed from the PCM while it was powered on. This could be during engine operation, or after the key off while the PCM was powering down. The power down phase can last up to 10 minutes.
OBDII Code P060C Dodge - Internal Control Module Main Processor Performance - AutoCodes.com
P060C Dodge Code - Internal Control Module Main Processor Performance

What are the Possible Causes of the DTC P060C Dodge?

  • Low Battery Voltage
  • Battery harness is open or shorted
  • Battery circuit poor electrical connection
  • Faulty Battery
  • Engine Control Module (ECM) Programming
  • Faulty Engine Control Module

How to Fix the DTC P060C Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P060C Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P060C Dodge code?

Need more information on how to fix the P060C Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P060C Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P060C Dodge Code

1. What does the OBDII code P060C mean for a Dodge vehicle?

P060C indicates an issue with the internal control module's main processor performance, suggesting a malfunction in the engine control module (ECM).

2. What are the common symptoms of P060C in a Dodge?

Symptoms include the check engine light turning on, engine misfires, poor acceleration, reduced fuel efficiency, or the engine failing to start.

3. What causes the P060C code in a Dodge?

Common causes include a faulty ECM, software corruption, electrical issues like wiring damage or poor connections, or interference from aftermarket devices.

4. Can I drive my Dodge with the P060C code active?

Driving with P060C is not recommended, as it may lead to poor performance, potential stalling, and further damage to the ECM or other components.

5. How do you diagnose the P060C code on a Dodge?

Diagnosis involves using a scan tool to check for related codes, inspecting the ECM for physical damage, testing wiring and connectors, and verifying proper voltage supply.

6. Is the P060C code specific to Dodge vehicles?

No, P060C is a generic OBDII code that can appear in many vehicles, but its specific symptoms and causes may vary by make and model.

7. What is the most common fix for the P060C code on a Dodge?

The most common fix is reprogramming or replacing the ECM, but the exact repair depends on the root cause, such as fixing wiring or resolving software issues.

8. Can a dead battery cause the P060C code in a Dodge?

Yes, a dead or weak battery can cause voltage fluctuations that may trigger the P060C code.

9. How much does it cost to fix the P060C code on a Dodge?

Repair costs can range from $100 for minor wiring repairs to over $1,000 for ECM replacement and programming.

10. Can a software update resolve the P060C code on a Dodge?

Yes, if the issue is caused by outdated or corrupted ECM software, a dealer-performed software update may fix the problem.

Discuss the causes and fixes for P060C Dodge OBDII Code

Code P060C Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play