AutoCodes – Buick – P060C Buick

P060C Buick Code - Internal Control Module Main Processor Performance

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Engine Control Module (ECM) Programming, Faulty Engine Control Module, Faulty Engine Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P060C Buick indicates Internal Control Module Main Processor Performance.
Common causes: Common causes include Engine Control Module (ECM) Programming, Faulty Engine Control Module, Faulty Engine Control Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,058

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 29, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P060C Buick Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This self−check ensures that the ECM is functioning properly. This diagnostic also addresses the issue of the device not being programmed. The device monitors its ability to read and write to the memory. It also monitors a timing function. No external circuits are involved. If any malfunction is detected, the ECM will set the code and illuminate the engine light.

OBDII Code P060C Buick - Internal Control Module Main Processor Performance - AutoCodes.com — P060C Buick Code - Internal Control Module Main Processor Performance

What does this mean?

What are the Possible Causes of the DTC P060C Buick?

Engine Control Module (ECM) Programming
Faulty Engine Control Module
Faulty Engine Control Module harness is open or shorted
Faulty Engine Control Module circuit poor electrical connection

How to Fix the DTC P060C Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P060C Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P060C Buick code?

Need more information on how to fix the P060C Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P060C Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P060C Buick Code

1. What does the OBDII code P060C mean on a Buick?

The P060C code indicates an issue with the internal control module's main processor performance, meaning the engine control module (ECM) may not be functioning properly.

2. What are the common symptoms of the P060C code in a Buick?

Symptoms can include a check engine light, poor engine performance, difficulty starting, reduced fuel efficiency, or the engine going into limp mode.

3. What causes the P060C code to appear on a Buick?

Common causes include a software glitch in the ECM, a failing ECM, damaged wiring or connectors, or electrical interference from other components.

4. Can I drive my Buick with a P060C code?

Driving with this code may be possible but is not recommended, as it can lead to reduced performance, potential engine damage, or safety concerns due to limp mode activation.

5. How is the P060C code on a Buick diagnosed?

A technician typically checks for other related codes, inspects the ECM and its connections, tests the wiring for shorts or damage, and verifies the ECM's software version.

6. What repairs can fix the P060C code on a Buick?

Repairs may include updating or reprogramming the ECM software, repairing or replacing damaged wiring, cleaning connectors, or replacing the ECM if itâ€™s faulty.

7. How much does it cost to fix the P060C code on a Buick?

Repair costs vary but can range from $150 to $1,500 depending on whether the issue is a simple wiring repair or a full ECM replacement.

8. Can a dead battery cause the P060C code in a Buick?

Yes, a weak or dead battery can cause voltage irregularities that may trigger the P060C code, so the battery and charging system should be checked.

9. Will clearing the P060C code fix the problem on my Buick?

Clearing the code may turn off the check engine light temporarily, but it wonâ€™t resolve the underlying issue causing the code to appear.

10. Is the P060C code a common issue in Buick vehicles?

The P060C code is not extremely common but can occur in any vehicle with ECM-related problems, particularly as the vehicle ages or if electrical issues arise.