AutoCodes – Buick – P060B Buick

P060B Buick Code - Internal Control Module Analog to Digital Converter Performance

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Engine Control Module (ECM) Programming, Faulty Engine Control Module (ECM), Faulty Engine Control Module (ECM) harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P060B Buick indicates Internal Control Module Analog to Digital Converter Performance.
Common causes: Common causes include Engine Control Module (ECM) Programming, Faulty Engine Control Module (ECM), Faulty Engine Control Module (ECM) harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,262

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 12, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P060B Buick Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This self−check insures that the ECM is functioning properly. This diagnostic also addresses if the device is not programmed. The device monitors its ability to read and write to the memory. It also monitors a timing function. No external circuits are involved. If any malfunction is detected, the ECM will set the code and illuminate the engine light.

OBDII Code P060B Buick - Internal Control Module Analog to Digital Converter Performance - AutoCodes.com — P060B Buick Code - Internal Control Module Analog to Digital Converter Performance

What does this mean?

What are the Possible Causes of the DTC P060B Buick?

Engine Control Module (ECM) Programming
Faulty Engine Control Module (ECM)
Faulty Engine Control Module (ECM) harness is open or shorted
Faulty Engine Control Module (ECM) circuit poor electrical connection

How to Fix the DTC P060B Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P060B Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P060B Buick code?

Need more information on how to fix the P060B Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P060B Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P060B Buick Code

1. What does the OBDII code P060B mean on a Buick?

P060B indicates a performance issue with the internal control moduleâ€™s analog-to-digital converter, which converts sensor data into digital signals for the engine control module.

2. What are the common symptoms of a P060B code in a Buick?

Common symptoms include poor engine performance, stalling, difficulty starting, reduced fuel efficiency, and activation of the check engine light.

3. What causes a P060B code in a Buick?

Potential causes include a faulty engine control module (ECM), wiring issues, poor electrical connections, or a problem with the power supply to the ECM.

4. Can I drive my Buick with a P060B code?

Itâ€™s not recommended to drive with this code, as it can lead to reduced engine performance or potential safety issues if the vehicle stalls unexpectedly.

5. How do you diagnose a P060B code in a Buick?

Diagnosis typically involves scanning for additional codes, inspecting ECM wiring and connectors, testing the power supply and ground circuits, and potentially testing or replacing the ECM.

6. Can a software update fix a P060B code in a Buick?

In some cases, a reflash or software update for the ECM may resolve the issue if the problem is caused by a software glitch.

7. How much does it cost to repair a P060B code in a Buick?

Repair costs can vary widely, from $100-$200 for minor wiring repairs to $500-$1,500 if the ECM needs to be replaced and reprogrammed.

8. Can a weak battery cause a P060B code in a Buick?

Yes, a weak or failing battery can lead to voltage irregularities that may trigger this code, so checking the battery and charging system is important.

9. Do I need to replace the ECM if I get a P060B code?

Not always. The ECM should only be replaced after other potential causes, like wiring or power supply issues, have been ruled out.

10. How can I prevent a P060B code from occurring again in my Buick?

Regularly inspect and maintain the vehicleâ€™s electrical system, ensure proper battery voltage, and address any wiring or connector issues promptly to prevent future occurrences.