P060A Ford Code - Internal Control Module Monitoring Processor Performance
Quick Answer
Indicates an error occurred in the Powertrain Control Module (PCM). Common causes include Software incompatibility issue, Faulty Powertrain Control Module (PCM), PCM harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P060A Ford indicates Internal Control Module Monitoring Processor Performance.
- Common causes
- Common causes include Software incompatibility issue, Faulty Powertrain Control Module (PCM), PCM harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P060A Ford Description
What are the Possible Causes of the DTC P060A Ford?
- Software incompatibility issue
- Faulty Powertrain Control Module (PCM)
- PCM harness is open or shorted
- PCM circuit poor electrical connection
How to Fix the DTC P060A Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P060A Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P060A Ford code?
Need more information on how to fix the P060A Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P060A Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P060A Ford Code
1. What are common symptoms of OBDII code P060A in a Ford vehicle?
- Common symptoms include the Check Engine light illuminating, rough idle, poor acceleration, and potential issues with starting the vehicle.
2. What does OBDII code P060A in a Ford indicate?
- OBDII code P060A indicates that there is a performance issue with the Internal Control Module Monitoring Processor.
3. What are the possible causes of OBDII code P060A in a Ford?
- Possible causes include a faulty PCM (Powertrain Control Module), software issues, electrical problems, or issues with the wiring harness.
4. How can I diagnose OBDII code P060A in my Ford vehicle?
- Diagnosis typically involves using a professional OBDII scanner to read the code, checking for any other related codes, and inspecting the PCM and related components for any visible damage.
5. Can I continue driving my Ford with OBDII code P060A?
- It is not recommended to drive your vehicle with code P060A as it can lead to further damage and potential safety issues. It's best to address the problem promptly.
6. How can I repair OBDII code P060A in my Ford?
- Repair options may include reprogramming the PCM, replacing the PCM, fixing any wiring issues, or addressing any underlying software problems. It's recommended to consult a professional mechanic for proper diagnosis and repair.
7. Is it possible to reset OBDII code P060A in a Ford without fixing the issue?
- While you can clear the code temporarily, it will likely reappear if the underlying issue is not addressed. It's essential to diagnose and repair the problem to prevent further complications.
8. Can a DIY enthusiast fix OBDII code P060A in a Ford?
- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address simple causes of P060A, such as checking for loose connections or damaged wiring. However, more complex issues may require professional assistance.
9. How much does it cost to repair OBDII code P060A in a Ford?
- The cost of repair can vary significantly depending on the underlying cause, parts needed, and labor costs. It's advisable to obtain multiple quotes from reputable mechanics to determine the most cost-effective solution.
10. Will OBDII code P060A cause my Ford vehicle to fail an emissions test?
- Yes, OBDII code P060A can cause your Ford vehicle to fail an emissions test, as it indicates a problem with the vehicle's emissions control system. It's crucial to address the issue before attempting an emissions test.
Discuss the causes and fixes for P060A Ford OBDII Code
-
Check engine light came on in my 12017 Ford Focus, no noticeable ailments. Took to the FORD service center, they uploaded latest "flash" they said... light is off, now waiting as they said they have NO IDEA what that code "P060A-00" is for. They checked service boards, memo's, etc... so I guess we are waiting to see what happens. In the meantime, my 2017 Mustang is now running on 7 cyl due to a defective coil (only have 16,000 miles on it). grrrr... They can't get part in and car in to get fixed for 7 days! TWO Ford 2017's and both with check engine lights on them!!
-
Unfortunately I couldn't find any information either. I hope the Powertrain Control Module (PCM) program update (flash) fixes the problem.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
