AutoCodes – Nissan – P0607 2013 Nissan Rogue

P0607 2013 Nissan Rogue Code - Control Module Performance

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0607 2013 Nissan Rogue indicates Control Module Performance.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,999

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0607 2013 Nissan Rogue Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This selfâˆ’check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.

OBDII Code P0607 2013 Nissan Rogue - Control Module Performance - AutoCodes.com — P0607 2013 Nissan Rogue Code - Control Module Performance

What does this mean?

What are the Possible Causes of the DTC P0607 2013 Nissan Rogue?

Faulty Engine Control Module (ECM)
Engine Control Module (ECM) Harness power supply circuit is open or shorted
Engine Control Module (ECM) Programming

How to Fix the DTC P0607 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check the ECM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0607 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0607 2013 Nissan Rogue code?

Need more information on how to fix the P0607 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0607 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0607 2013 Nissan Rogue Code

1. What does the OBDII code P0607 mean on a 2013 Nissan Rogue?

P0607 indicates a "Control Module Performance" issue, suggesting that the Engine Control Module (ECM) has detected an internal malfunction.

2. What are the common symptoms of the P0607 code in a 2013 Nissan Rogue?

Symptoms may include the Check Engine Light being illuminated, engine misfires or stalling, rough idling, reduced fuel efficiency, or the vehicle entering limp mode.

3. What causes the P0607 code in a 2013 Nissan Rogue?

Common causes include a faulty ECM, software corruption, poor electrical connections, damaged wiring, or issues with sensors providing incorrect data to the ECM.

4. Can a weak or dead battery cause the P0607 code in a 2013 Nissan Rogue?

Yes, a weak or failing battery can trigger the P0607 code because insufficient voltage may disrupt the ECM's operation.

5. How do I troubleshoot the P0607 code on a 2013 Nissan Rogue?

Start by checking the battery voltage and terminals, inspecting wiring and connections to the ECM, and using a scan tool to clear the code and monitor if it recurs.

6. Does the P0607 code in a 2013 Nissan Rogue always mean the ECM is faulty?

No, while the ECM can fail, the issue may also stem from wiring problems, loose connectors, or sensor malfunctions. Proper diagnosis is essential.

7. Can I still drive my 2013 Nissan Rogue with a P0607 code?

Driving with a P0607 code is not recommended, as the ECM may not function properly, potentially causing unsafe driving conditions or further damage.

8. What is the cost to repair a P0607 code on a 2013 Nissan Rogue?

Repair costs vary widely depending on the cause. Replacing an ECM can cost $500â€“$1500, while simpler fixes like repairing wiring or updating software may cost significantly less.

9. Can a software update fix the P0607 code in a 2013 Nissan Rogue?

Yes, if the issue is due to corrupted or outdated ECM software, a software update performed by a dealership or qualified mechanic may resolve the problem.

10. How can I prevent the P0607 code from occurring in my 2013 Nissan Rogue?

Regular maintenance, ensuring the battery is in good condition, promptly addressing electrical issues, and avoiding aftermarket modifications can help prevent this code.