P0607 2011 TOYOTA CAMRY - Control Module Performance
Possible causes
- Exhaust Leak
- Oxygen Sensor
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
Tech notes
Check for Exhaust leaks, oxygen sensor and ECM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.When is the code detected?
Indicates the ECM has experienced an internal memory fault.Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine may not start
P0607 2011 Toyota Camry Description
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This selfâcheck insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.The ECM memory status is diagnosed by internal mirroring of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The two CPUs also perform continuous mutual monitoring. The ECM illuminates the MIL and sets a DTC if: 1) outputs from the two CPUs are different or deviate from the standards, 2) the signals sent to the throttle actuator deviate from the standards, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.
Need more help?
Get the P0607 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your areaRelated Information
P0607 2011 TOYOTA CAMRY Comments
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0607 2011 Toyota Camry code? Have you replaced any parts?Any information is appreciated. Thanks