AutoCodes – Nissan – P0607 2011 Nissan Rogue

P0607 2011 Nissan Rogue Code - Control Module Performance

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0607 2011 Nissan Rogue indicates Control Module Performance.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,754

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0607 2011 Nissan Rogue Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This selfâˆ’check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.

OBDII Code P0607 2011 Nissan Rogue - Control Module Performance - AutoCodes.com — P0607 2011 Nissan Rogue Code - Control Module Performance

What does this mean?

What are the Possible Causes of the DTC P0607 2011 Nissan Rogue?

Faulty Engine Control Module (ECM)
Engine Control Module (ECM) Harness power supply circuit is open or shorted
Engine Control Module (ECM) Programming

How to Fix the DTC P0607 2011 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check the ECM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0607 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0607 2011 Nissan Rogue code?

Need more information on how to fix the P0607 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0607 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0607 2011 Nissan Rogue Code

1. What is OBDII code P0607 in a 2011 Nissan Rogue?

The OBDII code P0607 in a 2011 Nissan Rogue indicates a fault related to the control module performance.

2. What are the common symptoms of OBDII code P0607 in a 2011 Nissan Rogue?

Common symptoms of OBDII code P0607 in a 2011 Nissan Rogue include engine stalling, rough idling, and issues with starting the vehicle.

3. What are the possible causes of OBDII code P0607 in a 2011 Nissan Rogue?

Possible causes of OBDII code P0607 in a 2011 Nissan Rogue include a faulty engine control module (ECM), wiring issues, or a software malfunction.

4. How can I diagnose OBDII code P0607 in my 2011 Nissan Rogue?

Diagnosing OBDII code P0607 in a 2011 Nissan Rogue typically involves using a diagnostic scanner to retrieve the code and performing a thorough inspection of the ECM and related components.

5. Can I still drive my 2011 Nissan Rogue with OBDII code P0607?

It is not recommended to drive your 2011 Nissan Rogue with OBDII code P0607, as it can lead to further damage and potentially unsafe driving conditions.

6. What are the repair options for OBDII code P0607 in a 2011 Nissan Rogue?

Repair options for OBDII code P0607 in a 2011 Nissan Rogue may include replacing the ECM, addressing wiring issues, or reprogramming the control module.

7. How much does it cost to fix OBDII code P0607 in a 2011 Nissan Rogue?

The cost to fix OBDII code P0607 in a 2011 Nissan Rogue can vary depending on the specific issue, but it may range from a few hundred to over a thousand dollars.

8. Can OBDII code P0607 in a 2011 Nissan Rogue be fixed at home?

Fixing OBDII code P0607 in a 2011 Nissan Rogue at home may be possible for experienced DIYers, but it is recommended to consult a professional technician for proper diagnosis and repair.

9. Will resetting the OBDII code P0607 in my 2011 Nissan Rogue make it go away?

Resetting the OBDII code P0607 in a 2011 Nissan Rogue may temporarily clear the code, but it will likely reappear if the underlying issue is not addressed.

10. Is OBDII code P0607 in a 2011 Nissan Rogue a common problem?

While OBDII code P0607 in a 2011 Nissan Rogue is not extremely common, it can occur due to various factors affecting the control module performance.