P0607 2010 Nissan Altima Sedan Code - Control Module Performance
Quick Answer
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0607 2010 Nissan Altima Sedan indicates Control Module Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0607 2010 Nissan Altima Sedan Description
What are the Possible Causes of the DTC P0607 2010 Nissan Altima Sedan?
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
How to Fix the DTC P0607 2010 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0607 2010 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0607 2010 Nissan Altima Sedan code?
Need more information on how to fix the P0607 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0607 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0607 2010 Nissan Altima Sedan Code
1. What does the OBDII code P0607 mean on a 2010 Nissan Altima Sedan?
P0607 indicates a "Control Module Performance" issue, which means the Engine Control Module (ECM) has detected an internal performance fault.
2. What are the common symptoms of the P0607 code in a 2010 Nissan Altima?
Symptoms can include the Check Engine Light turning on, reduced engine performance, poor fuel economy, difficulty starting, or the vehicle entering limp mode.
3. What causes the P0607 code to appear in a 2010 Nissan Altima?
Possible causes include a faulty ECM, software issues in the ECM, wiring or circuitry problems, a weak battery, or poor electrical connections.
4. Can a weak or failing battery trigger the P0607 code?
Yes, a weak or failing battery can cause voltage issues that may lead to the P0607 code being stored.
5. How is the P0607 code diagnosed in a 2010 Nissan Altima?
Diagnosis involves scanning for codes, inspecting the ECM and related wiring, testing the battery and charging system, and verifying ECM software functionality.
6. Can I continue driving my 2010 Nissan Altima with the P0607 code?
It is not recommended to drive with this code, as it may cause the vehicle to enter limp mode or lead to further damage.
7. How do I fix the P0607 code on a 2010 Nissan Altima?
Repairs may include replacing or reprogramming the ECM, repairing damaged wiring or connectors, or addressing battery and electrical issues.
8. Does the P0607 code always mean the ECM is faulty?
No, the ECM may not necessarily be faulty. The issue could be related to wiring, poor electrical connections, or software errors.
9. What should I check first if I get the P0607 code?
Start by checking the battery voltage, inspecting the ECM’s wiring and connectors, and ensuring there are no loose or corroded connections.
10. Is reprogramming the ECM necessary for fixing the P0607 code?
In some cases, reprogramming the ECM with updated software can resolve the issue, but this depends on the specific cause of the code.
Discuss the causes and fixes for P0607 2010 Nissan Altima Sedan OBDII Code
Code P0607 2010 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
