AutoCodesNissan – P0607 2009 Nissan Rogue

P0607 2009 Nissan Rogue Code - Control Module Performance

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0607 2009 Nissan Rogue indicates Control Module Performance.
Common causes
Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,048
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0607 2009 Nissan Rogue Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This self−check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.
OBDII Code P0607 2009 Nissan Rogue - Control Module Performance - AutoCodes.com
P0607 2009 Nissan Rogue Code - Control Module Performance

What are the Possible Causes of the DTC P0607 2009 Nissan Rogue?

  • Faulty Engine Control Module (ECM)
  • Engine Control Module (ECM) Harness power supply circuit is open or shorted
  • Engine Control Module (ECM) Programming

How to Fix the DTC P0607 2009 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0607 2009 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0607 2009 Nissan Rogue code?

Need more information on how to fix the P0607 2009 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0607 2009 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0607 2009 Nissan Rogue Code

1. What does the OBDII code P0607 mean on a 2009 Nissan Rogue?

P0607 indicates a Control Module Performance issue, meaning the Engine Control Module (ECM) has detected a malfunction in its internal circuitry or software.

2. What are the symptoms of the P0607 code in a 2009 Nissan Rogue?

Common symptoms include engine stalling, reduced fuel efficiency, difficulty starting, the Check Engine Light being illuminated, or erratic engine performance.

3. What causes the P0607 code in a 2009 Nissan Rogue?

Causes may include a faulty ECM, software corruption, poor electrical connections, wiring issues, or a failing power supply to the ECM.

4. Can a bad battery cause the P0607 code on a 2009 Nissan Rogue?

Yes, a weak or failing battery can cause voltage irregularities that may trigger the P0607 code by affecting ECM performance.

5. How do I fix the P0607 code on a 2009 Nissan Rogue?

Check for loose or corroded wiring to the ECM, test the battery and alternator, and inspect ECM grounds. If no issues are found, the ECM may need to be reprogrammed or replaced.

6. Can I drive my 2009 Nissan Rogue with the P0607 code?

You can drive the vehicle, but it’s not recommended as the issue can lead to engine stalling or unpredictable performance, potentially creating unsafe conditions.

7. How much does it cost to fix the P0607 code on a 2009 Nissan Rogue?

Repair costs vary. Reprogramming the ECM may cost $100–$200, but replacing the ECM can range from $500 to $1,500 or more, depending on parts and labor.

8. Does the P0607 code always mean the ECM is faulty?

Not always. Sometimes the issue is due to poor electrical connections, wiring problems, or a temporary glitch that can be resolved by resetting the ECM.

9. How do I reset the P0607 code in my 2009 Nissan Rogue?

Disconnect the battery for about 15 minutes or use an OBDII scanner to clear the code, but ensure the underlying issue is addressed to prevent the code from returning.

10. Is a software update a possible fix for the P0607 code in a 2009 Nissan Rogue?

Yes, if the P0607 code is caused by ECM software corruption, a software update from a Nissan dealership may resolve the issue.

Discuss the causes and fixes for P0607 2009 Nissan Rogue OBDII Code

Code P0607 2009 Nissan Rogue comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play