AutoCodes – Nissan – P0607 2008 Nissan Rogue

P0607 2008 Nissan Rogue Code - Control Module Performance

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0607 2008 Nissan Rogue indicates Control Module Performance.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,029

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0607 2008 Nissan Rogue Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This selfâˆ’check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.

OBDII Code P0607 2008 Nissan Rogue - Control Module Performance - AutoCodes.com — P0607 2008 Nissan Rogue Code - Control Module Performance

What does this mean?

What are the Possible Causes of the DTC P0607 2008 Nissan Rogue?

Faulty Engine Control Module (ECM)
Engine Control Module (ECM) Harness power supply circuit is open or shorted
Engine Control Module (ECM) Programming

How to Fix the DTC P0607 2008 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check the ECM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0607 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0607 2008 Nissan Rogue code?

Need more information on how to fix the P0607 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0607 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0607 2008 Nissan Rogue Code

1. What does the OBDII code P0607 on a 2008 Nissan Rogue mean?

The P0607 code indicates a performance issue with the engine control module (ECM) or powertrain control module (PCM) in the vehicle.

2. What are common symptoms of a P0607 code on a 2008 Nissan Rogue?

Common symptoms include poor engine performance, rough idling, stalling, and the illumination of the Check Engine Light.

3. What are the possible causes of a P0607 code on a 2008 Nissan Rogue?

Potential causes include a faulty ECM/PCM, wiring issues, software corruption, low battery voltage, or a defective sensor affecting the control module.

4. How can I diagnose a P0607 code on my 2008 Nissan Rogue?

Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the ECM/PCM connections, checking for wiring faults, and testing the battery voltage.

5. Can I still drive my 2008 Nissan Rogue with a P0607 code?

It's not recommended to drive the vehicle with a P0607 code, as it may lead to further damage and potential safety concerns. It's best to address the issue promptly.

6. How can I repair a P0607 code on a 2008 Nissan Rogue?

Repair options may include reprogramming the ECM/PCM, repairing or replacing wiring, addressing sensor issues, or replacing the control module if necessary.

7. Is it necessary to reset the ECM/PCM after repairing a P0607 code on a 2008 Nissan Rogue?

Yes, it's essential to clear the code and reset the ECM/PCM using an OBDII scanner after completing any repairs to ensure proper functioning of the control module.

8. Can a DIY enthusiast fix a P0607 code on a 2008 Nissan Rogue?

While some basic checks like inspecting connections and wiring can be done by a DIY enthusiast, diagnosing and repairing control module issues may require professional expertise.

9. How much does it cost to repair a P0607 code on a 2008 Nissan Rogue at a mechanic?

Repair costs can vary based on the exact cause of the issue and labor rates, but expect to pay anywhere from $200 to $800 or more for diagnosing and fixing a P0607 code.

10. What preventive measures can I take to avoid a P0607 code on my 2008 Nissan Rogue in the future?

Regular maintenance, ensuring proper battery health, avoiding electrical system overloads, and addressing any warning signs promptly can help prevent P0607 and other control module issues.