AutoCodes – Ford – P0607 2008 Ford Fusion

P0607 2008 Ford Fusion Code - Control Module Performance

Quick Answer

Indicates that the Powertrain Control Module (PCM) internal central processing unit (CPU) has encountered an error. Common causes include Powertrain Control Module (PCM) may be faulty, Powertrain Control Module harness power supply circuit is open or shorted, Powertrain Control Module harness ground circuit is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0607 2008 Ford Fusion indicates Control Module Performance.
Common causes: Common causes include Powertrain Control Module (PCM) may be faulty, Powertrain Control Module harness power supply circuit is open or shorted, Powertrain Control Module harness ground circuit is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,831

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0607 2008 Ford Fusion Description

Indicates that the Powertrain Control Module (PCM) internal central processing unit (CPU) has encountered an error. The PCM monitors itself and carries out internal checks of its own CPU.

OBDII Code P0607 2008 Ford Fusion - Control Module Performance - AutoCodes.com — P0607 2008 Ford Fusion Code - Control Module Performance

What does this mean?

What are the Possible Causes of the DTC P0607 2008 Ford Fusion?

Powertrain Control Module (PCM) may be faulty
Powertrain Control Module harness power supply circuit is open or shorted
Powertrain Control Module harness ground circuit is open or shorted
Module programming error

How to Fix the DTC P0607 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check the PCM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the PCM.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0607 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0607 2008 Ford Fusion code?

Need more information on how to fix the P0607 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0607 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0607 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P0607 in a 2008 Ford Fusion?

- Common symptoms include engine stalling, rough idling, poor acceleration, and illuminated Check Engine Light.

2. What does OBDII code P0607 indicate in a 2008 Ford Fusion?

- OBDII code P0607 indicates a performance issue with the engine control module (ECM) in the 2008 Ford Fusion.

3. What are the possible causes of OBDII code P0607 in a 2008 Ford Fusion?

- Possible causes include a faulty ECM, wiring issues, software corruption, or a poor electrical connection.

4. How can I diagnose OBDII code P0607 in my 2008 Ford Fusion?

- Diagnosing code P0607 may require a professional scan tool to communicate with the ECM and check for specific fault codes and data.

5. Can OBDII code P0607 in a 2008 Ford Fusion be repaired?

- Yes, OBDII code P0607 can be repaired by addressing the root cause, which may involve replacing the ECM, repairing wiring, or updating software.

6. Is it safe to continue driving with OBDII code P0607 in a 2008 Ford Fusion?

- It is not recommended to continue driving with code P0607 as it can lead to further damage and potential safety hazards.

7. How much does it typically cost to repair OBDII code P0607 in a 2008 Ford Fusion?

- The cost of repairing code P0607 can vary depending on the cause, but it may range from $200 to $800 including parts and labor.

8. Can I reset OBDII code P0607 in my 2008 Ford Fusion using a simple OBDII scanner?

- While you can clear the code with a scanner, it is essential to address the underlying issue causing the code to prevent it from reoccurring.

9. Are there any DIY repair tips for OBDII code P0607 in a 2008 Ford Fusion?

- DIY repair may be challenging for this code, so it is recommended to consult with a professional mechanic for proper diagnosis and repair.

10. How long does it take to repair OBDII code P0607 in a 2008 Ford Fusion?

- The repair time for code P0607 can vary depending on the cause and complexity, but it may take a few hours to a full day for the repair to be completed.