P0607 2007 Toyota Highlander Code - Control Module Performance
Quick Answer
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0607 2007 Toyota Highlander indicates Control Module Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0607 2007 Toyota Highlander Description
The ECM memory status is diagnosed by internal mirroring of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The two CPUs also perform continuous mutual monitoring. The ECM illuminates the MIL and sets a DTC if: 1) outputs from the two CPUs are different or deviate from the standards, 2) the signals sent to the throttle actuator deviate from the standards, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.
What are the Possible Causes of the DTC P0607 2007 Toyota Highlander?
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
How to Fix the DTC P0607 2007 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0607 2007 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0607 2007 Toyota Highlander code?
Need more information on how to fix the P0607 2007 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0607 2007 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0607 2007 Toyota Highlander Code
1. What are the common symptoms of an OBDII code P0607 in a 2007 Toyota Highlander?
The common symptoms include engine stalling, rough idling, poor acceleration, and the illumination of the Check Engine Light.
2. What could cause the OBDII code P0607 to appear in a 2007 Toyota Highlander?
The code P0607 typically indicates a malfunction in the Engine Control Module (ECM) or Powertrain Control Module (PCM) of the vehicle. This could be due to a faulty ECM, wiring issues, or software problems.
3. How can I diagnose the cause of the OBDII code P0607 in my 2007 Toyota Highlander?
Diagnosing the P0607 code usually involves checking the ECM/PCM for any visible damage, testing the wiring harness for continuity, and using a diagnostic scanner to retrieve additional trouble codes or freeze frame data.
4. Can a DIY enthusiast repair the OBDII code P0607 in a 2007 Toyota Highlander?
While some basic troubleshooting steps can be performed by DIY enthusiasts, repairing the P0607 code often requires specialized tools and expertise. It is recommended to consult a professional mechanic for proper diagnosis and repair.
5. Is it safe to continue driving my 2007 Toyota Highlander with the OBDII code P0607?
Continuing to drive with a P0607 code may lead to further damage to the ECM/PCM and other vehicle components. It is advisable to address the issue promptly to prevent potential safety hazards and expensive repairs down the line.
6. What are some possible repair options for the OBDII code P0607 in a 2007 Toyota Highlander?
Repair options for the P0607 code may include reprogramming or replacing the ECM/PCM, repairing any damaged wiring, or updating the software to address the performance issue.
7. How much does it typically cost to repair the OBDII code P0607 in a 2007 Toyota Highlander?
The cost of repairing the P0607 code can vary depending on the underlying cause, the extent of the damage, and the labor rates in your area. It is recommended to obtain quotes from reputable mechanics for an accurate estimate.
8. Can a bad battery or alternator cause the OBDII code P0607 in a 2007 Toyota Highlander?
While a faulty battery or alternator can potentially cause electrical issues in a vehicle, the P0607 code specifically points to ECM/PCM performance problems. It is advisable to address the P0607 code directly to resolve the issue.
9. How long does it take to repair the OBDII code P0607 in a 2007 Toyota Highlander?
The repair time for the P0607 code can vary depending on the diagnostic process, the availability of parts, and the complexity of the repair. It is best to consult with a mechanic to get a more accurate timeframe for the repair.
10. Will resetting the OBDII code P0607 in a 2007 Toyota Highlander make it go away permanently?
Resetting the code may temporarily turn off the Check Engine Light, but if the underlying issue causing the P0607 code is not addressed, it is likely to reappear. It is important to diagnose and repair the root cause of the code to prevent future occurrences.
Discuss the causes and fixes for P0607 2007 Toyota Highlander OBDII Code
Code P0607 2007 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
