P0607 2006 Toyota Highlander Code - Control Module Performance
Quick Answer
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0607 2006 Toyota Highlander indicates Control Module Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0607 2006 Toyota Highlander Description
The ECM memory status is diagnosed by internal mirroring of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The two CPUs also perform continuous mutual monitoring. The ECM illuminates the MIL and sets a DTC if: 1) outputs from the two CPUs are different or deviate from the standards, 2) the signals sent to the throttle actuator deviate from the standards, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.
What are the Possible Causes of the DTC P0607 2006 Toyota Highlander?
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
How to Fix the DTC P0607 2006 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0607 2006 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0607 2006 Toyota Highlander code?
Need more information on how to fix the P0607 2006 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0607 2006 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0607 2006 Toyota Highlander Code
1. What does the OBDII code P0607 mean on a 2006 Toyota Highlander?
P0607 indicates a "Control Module Performance" issue, meaning the Engine Control Module (ECM) has detected an internal malfunction.
2. What are the common symptoms of a P0607 code in a 2006 Toyota Highlander?
Common symptoms include engine stalling, poor acceleration, reduced fuel efficiency, the Check Engine Light illuminating, and, in some cases, the vehicle failing to start.
3. What causes a P0607 code in a 2006 Toyota Highlander?
Causes can include a faulty ECM, software corruption, poor electrical connections, damaged wiring, or issues with other sensors indirectly affecting ECM performance.
4. Can a bad battery cause a P0607 code in a Toyota Highlander?
Yes, a weak or failing battery can cause voltage irregularities that may trigger a P0607 code.
5. How do you diagnose a P0607 code on a 2006 Toyota Highlander?
Diagnosis involves scanning the ECM for additional codes, checking the battery and charging system, inspecting wiring and connectors, and testing the ECM's functionality.
6. Is it safe to drive with a P0607 code in a Toyota Highlander?
Driving with a P0607 code is not recommended, as it may lead to sudden engine stalling or other performance issues, compromising safety.
7. How is a P0607 code fixed on a 2006 Toyota Highlander?
Repairs may include reprogramming or replacing the ECM, repairing damaged wiring, cleaning corroded connectors, or replacing a weak battery.
8. Can I reset the P0607 code without fixing the issue?
Clearing the code without addressing the root cause may result in the code returning and potential further damage to the vehicle.
9. What is the cost to repair a P0607 code on a Toyota Highlander?
Repair costs vary but may range from $150 for minor wiring repairs to over $1,000 if the ECM needs replacing.
10. Can a software update fix a P0607 code in a 2006 Toyota Highlander?
Yes, if the issue is related to software corruption, an ECM reflash or update by a Toyota dealer may resolve the problem.
Discuss the causes and fixes for P0607 2006 Toyota Highlander OBDII Code
Code P0607 2006 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
