AutoCodes - Toyota - P0607 2006 TOYOTA CAMRY

P0607 2006 TOYOTA CAMRY Code - Control Module Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P0607 2006 TOYOTA CAMRY code possible causes

  • Exhaust Leak
  • Oxygen Sensor
  • Faulty Engine Control Module (ECM)
  • Engine Control Module (ECM) Harness power supply circuit is open or shorted
  • Engine Control Module (ECM) Programming

|How do I fix the P0607 2006 TOYOTA CAMRY code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0607 2006 TOYOTA CAMRY code tech notes

Check for Exhaust leaks, oxygen sensor and ECM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.

|Cost of diagnosing the P0607 2006 TOYOTA CAMRY code

Labor: 1.0

The cost of diagnosing the P0607 2006 TOYOTA CAMRY code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0607 2006 TOYOTA CAMRY code detected?

Indicates the ECM has experienced an internal memory fault.

|What are P0607 2006 TOYOTA CAMRY code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Engine may not start

|P0607 2006 TOYOTA CAMRY code description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This self−check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.
The ECM memory status is diagnosed by internal mirroring of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The two CPUs also perform continuous mutual monitoring. The ECM illuminates the MIL and sets a DTC if: 1) outputs from the two CPUs are different or deviate from the standards, 2) the signals sent to the throttle actuator deviate from the standards, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.
OBDII Code P0607 2006 Toyota Camry - Control Module Performance -

|Need more information with the P0607 2006 TOYOTA CAMRY code?

Need more information on how to fix the P0607 2006 TOYOTA CAMRY code?
Get Access to Factory Service Manuals

|Need help with a P0607 2006 TOYOTA CAMRY code?

Get the P0607 2006 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

|P0607 2006 TOYOTA CAMRY code comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0607 2006 Toyota Camry code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
1=Easy 2=Moderate 3=Hard What is this?