P0607 2004 Toyota Prius Code - Control Module Performance
Quick Answer
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0607 2004 Toyota Prius indicates Control Module Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0607 2004 Toyota Prius Description
The ECM memory status is diagnosed by internal mirroring of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The two CPUs also perform continuous mutual monitoring. The ECM illuminates the MIL and sets a DTC if: 1) outputs from the two CPUs are different or deviate from the standards, 2) the signals sent to the throttle actuator deviate from the standards, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.
What are the Possible Causes of the DTC P0607 2004 Toyota Prius?
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
How to Fix the DTC P0607 2004 Toyota Prius?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0607 2004 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0607 2004 Toyota Prius code?
Need more information on how to fix the P0607 2004 Toyota Prius code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0607 2004 Toyota Prius code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0607 2004 Toyota Prius Code
1. What does the OBDII code P0607 indicate on a 2004 Toyota Prius?
The code P0607 indicates a problem with the Control Module Performance, suggesting that there's an internal issue with the Engine Control Module (ECM) or Powertrain Control Module (PCM).
2. What symptoms might I notice if my 2004 Toyota Prius has the P0607 code?
Symptoms can include the check engine light being on, poor fuel economy, erratic behavior such as sudden stalling, reduced engine performance, and possible issues with starting the vehicle.
3. What are common causes of the P0607 code in a 2004 Toyota Prius?
Common causes include a faulty ECM/PCM, poor electrical connections to the ECM/PCM, or a power supply issue such as low voltage or bad ground connections.
4. How is the P0607 code diagnosed in a 2004 Toyota Prius?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the ECM and its connections for damage or loose wires, and checking the power supply and ground circuits. Further testing might involve monitoring the ECM with advanced diagnostic tools.
5. What are the steps to repair the P0607 code on a 2004 Toyota Prius?
Repair steps could include tightening or cleaning ECM connectors, repairing any damaged wiring, replacing the ECM if it is determined to be defective, and ensuring that all grounding points are secure.
6. Can I drive my 2004 Toyota Prius with the P0607 code active?
While you might be able to drive with this code active, it is not advisable as it involves critical control functions. Driving could lead to further damage or unsafe driving conditions due to potential engine stalling or erratic performance.
7. Is it expensive to fix the P0607 code on a 2004 Toyota Prius?
The cost can vary widely depending on the exact issue. If it’s a simple wiring fix, it could be relatively inexpensive. However, if the ECM needs to be replaced, the repair could be quite costly, sometimes running into hundreds of dollars.
8. Could a P0607 code result from a battery or alternator problem?
Yes, if the battery or alternator is failing and not providing adequate power to the ECM, it could trigger a P0607 code due to low voltage conditions.
9. How urgent is it to address the P0607 code in a 2004 Toyota Prius?
It is fairly urgent to address this issue as it involves the vehicle's main computer, which controls many aspects of engine operation and overall vehicle performance. Delaying repair could lead to more serious problems or a breakdown.
Discuss the causes and fixes for P0607 2004 Toyota Prius OBDII Code
Code P0607 2004 Toyota Prius comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
